Behavior and Design of Semi-Rigid Composite Frames
Recent advances and experimental research on the behavior of composite semi-rigid frames indicates that substantial savings can be achieved with this method of construction. The current...
On Steel Connection Data Bank at Purdue University
The aim of the establishment of the steel beam-to-column connection data bank program at Purdue University in 1986 was to provide the necessary data base for the determination of the moment-rotation...
Moment Rotation Curves for Double Framing Angles
Moment-rotation curves for bolted framed steel connections are derived from force-deflection data obtained from laboratory tension and compression tests of angle segments. These derived...
Practical Analysis of Flexibly-Connected Building Frames
Modeling of flexible connection behavior as elastic-perfectly plastic is proposed for analysis of building frames, and results based on this idealization are compared with fully non-linear...
Comparison of the Third and Fourth Edition of the Guide: What is New and Different
The fourth edition of the 'Guide to Stability Design Criteria for Metal Structures' is a unique collection of ideas and information on stability problems. It...
Centrally Loaded Columns
The paper has given a detailed description of the chapter on centrally loaded columns that will appear in the 4th Edition of the Structural Stability Research Council 'Guide...
Beam-Columns
The Fourth Edition of the SSRC Guide presents a state-of-the-art information on beam-columns for use by specification writers, researchers, and designers. The present paper is an extremely...
Circular Tubes and Shells 4th Edition of SSRC Guide
The 3rd edition of the Guide was the first to have a chapter devoted to Cylindrical Tubes and Shells. Chapter 14 in the 4th edition is a major revision of Chapter 10 in the previous edition....
Frame Stability
The Chapter on Frame Stability of the Fourth Edition of the SSRC Guide provides guidance on use of several stability design procedures. These include Critical Load Concept, Second-Order...
Effect of Connector Spacing on Double Angle Compressive Strength
The 1986 AISC 'Load and Resistance Factor Design (LRFD) Specification for Structural Steel Buildings' includes new rules affecting the design of built-up members...
Cumulative Damage of Structures
Structural response records may be analyzed to estimate relative motions of civil engineering structures. Several methods are available for the estimation of cumulative damage on the basis...
Reliability-oriented Design of Fatigue Experiments
It is well known in the reliability analysis for structural components subjected to cyclic random load that apart from the usually model parameters uncertainties are most important and...
Modeling Errors in Fatigue Crack Growth Laws
Using the fracture mechanics approach to fatigue it is possible to update estimates of a structure's reliability against fatigue failure given new information on the state...
Reliability Revision for Structures in Service
Models of structural reliability are called upon to provide not only initial estimates of safety, but also revised estimates reflecting new information on the structure as it becomes available....
Aluminum Orthotropic Bridge Deck Verification
This paper reports tests conducted to evaluate an aluminum orthotropic deck. Approximately 60 welded T-joints with 6061-T6 stems and 5456-H321 plate were subjected to flexural fatigue...
Fatigue Design Criteria for Welded Steel Details
A review of fatigue data and reassessment of the 1983 fatigue specification resistance functions has been conducted. Since the AASHTO specification fatigue resistance provisions were introduced...
A Fatigue Study of Prestressing Strand
Strand fatigue data reported in the literature and also from recent tests were combined to form a data base of strand fatigue data which was analyzed using regression analysis techniques....
Base Isolation for Reinforced Concrete Structures
A recent experimental program has been carried out at the Earthquake Simulator Laboratory of the Earthquake Engineering Research Center in which a 1/5th scale reinforced concrete structural...
Polymer Concrete for Structural Applications
Polymer concrete (PC) has been used extensively in the United States primarily as a repair material for portland cement concrete. The excellent flexural and compressive strength durability...
Chemical Admixtures for Concrete, What is in Them for the Structural Engineer?
The paper summarizes the effect of admixtures on the economy in construction of concrete structures, on their strength, and on their durability under a variety of service conditions. As...
Return to search