ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Instability of Slopes with Nonassociated Flow
Experimental investigations of the conditions for instability have shown that granular materials may become unstable inside the failure surface. For states of stress below the failure...

Analysis of Internal Discontinuities in Geo-Materials
A new approach for modeling localized deformations is proposed. This approach uses an interface element to model the shear band. A successful capture of the kinematics of a failure mechanism...

The Initiation of Bifurcations and Localization in Damaging Materials
Criteria for diffuse and discontinuous bifurcations have previously been developed and used to investigate the initiation of necking and localization in elastic-plastic materials. In this...

Detection of Cracks in Reinforced Concrete Cans
The Acoustic Emission Technique (AET) is known as a good possibility for non destructive detection of cracks in metal down to very small dimensions. To use AET for concrete, an efficient...

Neural Network Modeling of the Mechanical Behavior of Sand
Given a set of triaxial test data, an artificial neural network (ANN) has been trained to model the mechanical behavior of a medium-to-fine sand. Once trained, the ANN was tested by simulating...

Computer Simulation of Direct Shear Test
This paper presents a pilot study of a computer simulation of direct shear test on sands using the Discrete Element Method. The numerical test setup is described first, which is followed...

Improved Time-History Analysis for Structural Dynamics Calculations
Methods are developed to reduce the computational effort in time-history analysis of nonlinear structures. The methods permit use of much larger time intervals than are possible in conventional...

Wave Induced Vortex Near Seashore
The vortex motion behind submerged breakwaters in the nearshore region is studied. The RCPWAVE model (Ebersole et al., 1986) is used to calculate the wave field and thus the radiator stresses...

Nonlinear Geometric and Material Considerations in Shell Structures
A geometrically and materially nonlinear static shell theory allowing large displacements, rotations, and strains with parabolic shear is developed. The theory is cast into a total Lagrangian...

A Shear Locking Free Three-Node Triangular Plate Bending Element for Moderately-Thick and Thin Symmetrically Cross-Ply Laminated Plates
A shear locking free three-node triangular plate bending element based on Reissner/Mindlin theory for symmetric general cross-ply laminated plates is developed. The element has total nine...

Stress Wave Interaction in Finite Beam on Elastic Foundation
The short-time behavior of a finite Timeshenko beam on a Winkler foundation subjected to step and impulse loadings is presented. The transient behavior was analyzed by using the method...

Flexible Plates for Control of Stress Distribution
Use of a flexible plate in minimization of soil reaction concentrations at the edge was analyzed. The analysis utilizes a solution for vertical vibrations of the circular flexible plate...

Shear Flow Between Walls in Relative Motion
The paper reports on experiments on Couette flow, i.e., the shear-induced flow between surfaces which are in motion relative to each other. The novel aspect of the work is the appearance...

The Theory of Elasticity: 1950-1992 and Beyond: Concluding Remarks
Forty years ago the theory of elasticity could be completely characterized by A.E.H.Love in his monumental treatise as an effort to reduce to calculation the internal state of stress produced...

Harmonic Excitation of an Unconstrained Saturated Particle Bed
Past research on the flow of concentrated cohensinless mixtures have historically emphasized steady or quasi-steady motions while dynamic effects have received little attention in comparison....

Postbuckling Behavior of Stiffened Composite Shell Panels
The paper summarizes the current status of an ongoing study on the postbuckling behavior of thick and moderately thick composite stiffened shells. Axially compressed moderately thick panels...

Applications of Viscoelastic Damper to Jointed Structures for Seismic Mitigation
Some structures, such as dams, are built with contraction joints that might carry some small tensile stresses. Such joints are expected to open and close during an earthquake. That will...

Leakage Characteristics of the St. Jude Heart Valve
The requirement for anticoagulant therapy in patients implanted with mechanical heart valve prostheses is well known. A plausible explanation for this requirement is that the leakage flow...

Intra Vena Cava Balloon Pumping
An innovative prototype intravenous hollow-fiber oxygenator was developed in 1984 by B.G. Hattler. The device consisted of a microporous, hollow-fiber membrane oxygenator inserted into...

An Evaluation Study of Modified Mohr-Coulomb and Cap Models
Two failure criteria, namely Mohr-Coulomb and cap models, are considered in this paper with some modifications. Mohr-Coulomb theory is applied to concrete after stress and strain cut-offs...

 

 

 

 

Return to search