Probabilistic Basis for Bridge Design Codes
There is a growing interest in the development of rational design criteria for bridges. The fundamental problem is evalution of the loads and load carrying capacity. However, load and...
LRFD for Engineered Wood Construction: ASCE Pre-Standard, Wood Industry Initiative
The structural wood community in the United States is in the process of developing a reliability-based consensus Load and Resistance Factor Design (LRFD) standard for engineered wood construction....
Reliability Bases for Codes for Design of Reinforced Concrete Structures
The American Concrete Institute Standard 318, Building Code Requirements for Reinforced Concrete, has permitted the design of reinforced concrete structures in accordance with limit state...
Reliability-Based Analysis of Shallow Foundations
The effects of different parameters on the reliability of shallow foundations are examined. It is found that the footing depth, the footing length, and the load ratio have almost no effect...
Reliability Analysis of Axially Compressive Members
In the steel structure design code (TJ17-74) in China, a single curve was adopted for designing axially compressive members and the reliability of the column analyzed previously was based...
Reliability Synthesis of CFRP Laminated Plate
The paper presents a formulation of shift synthesis to improve the reliability of fiber reinforced plastic (FRP) laminated plates with uncertain elastic constants and lamina strength....
Load Resistance Factor Design of Aluminum Structures
Load and Resistance Factor Design (LRFD) is a reliability-based approach to design with uncertainty. It involves the explicit consideration of limit states, multiple load and resistance...
The Effect of Repeated Inspections on the Reliability Degradation Due to Fatigue Crack Growth
The effect of repeated in-service inspections on the reliability degradation due to fatigue crack growth is investigated based upon a stochastic fracture mechanics. A method to evaluate...
Parameter Identification and State Estimation of Structure Models in Shaking Table Test
In this paper physical parameters and inner states of structure can be estimated from the input and responses in shaking table test by means of Extended Kalman Filter (SIEKA). Comparing...
Bridge Live Load Models
This paper describes the analysis of weigh-in-motion data and the conclusions drawn. Statistical distributions of the effects induced in typical bridges due to single vehicle events are...
Reliability-Based Bridge Life Assessment
Fatigue considerations have usually entered design codes as a secondary consideration and often under the guise of serviceability limits. Most engineers felt if the maximum stress ranges...
Development of a Safety Assessment System for Steel Bridge Erection Work
In order to secure safe execution of steel bridge erection work, development of a comprehensive checking system to set up safety countermeasures at the stage of construction planning prior...
Redundancy Evaluation of Steel Girder Bridges
The focus of this paper is on the use of redundancy measures in the evaluation of bridge systems. The emphasis is on the definition of system redundancy measures suitable for use by bridge...
Seismic Reliability Analysis for Elevated Pressure Vessels
This paper presents two approaches for assessing the seismic reliability of elevated pressure vessels. A discretized mass mechanical system is used to model the dynamic effects of liquid...
Recent Seismic Risk Studies of Nuclear Power Plants: An Overview
Seismic probabilistic risk assessments (PRA) are conducted to estimate the frequencies of occurrence of severe core damage, serious radiological releases, and consequences in terms of...
Effect of the Uncertainty About the Fatigue Limit on Highway Bridge Reliability
Current fatigue design specifications for welded steel highway bridges subjected to high traffic volumes require the design to be capable of resisting high-cycle, long life conditions...
Reliability Assessment and Reliability-Based Rating of Existing Road Bridges
A practical reliability model for the safety assessment and rating of existing R.C. bridges are developed by explicitly incorporating the degree of deterioration and damages based on available...
Reliability and Redundancy Assessment of Prestressed Truss Bridges
Methods for the assessment of the reliability and redundancy of post-tensioned trusses are suggested. The effect of tendon layout on the reliability and redundancy of post-tensioned trusses...
On the Dynamic Response of Bridges by Oscillating Vehicles on Rough Surfaces
The spectral theory is applied to the response of bridges under a Poissonian stream of vehicles moving with constant speed over the bridge. The vehicles are modeled as oscillators with...
Reliability of a Suspension Bridge Under Traffic Flow
The problem of reliability of a single-span spatial suspension bridge under random highway traffic is considered. The displacements of the bridge are described by coupled, non-linear,...
Return to search