An Investigation of Live Loads on Concrete Structures During Construction
Slab formwork live loads include the weight of equipment, construction material storage loads, and impact loads when placing the concrete. In this paper material and equipment loads are...
Probabilistic and Reliability Analysis of Asphalt Concrete Airfield Pavements
A procedure was developed to analyze layered elastic asphaltic concrete airfield pavement systems in terms of probability and reliability. Rosenblueth method is used to estimate the expected...
On the CICIND Code
The CICIND Model Code for Concrete Chimneys was created by CICIND, an international technical association which has as one of its main aims the creation of harmonized internationally accepted...
Probabilistic Traffic Load Models and Extreme Loads on a Bridge
This paper contains a summary of the intensive traffic measurements collected in France and Europe, and of the probabilistic distributions adopted for the main parameters. The evaluation...
Reliability-Based LRFD For Bridges: Theoretical Basis
This paper develops a theoretical basis for obtaining probability-based load combination criteria for structural design. For choosing the load combinations and for determining the factors...
Probabilistic Evaluation of Load Factors for Steel Rigid-Frame Piers on Urban Expressway Network
A procedure is proposed for calculating the optimal load factors for steel rigid-frame piers using the extended level 2 reliability method. Twelve typical types of pier structures are...
Code-Implied Structural Safety for Earthquake Loading
A method is described for calculating the probability of failure of reinforced concrete frame structures due to earthquake loading, for use in code calibration exercises. The failure criterion...
Probabilistic Basis for Bridge Design Codes
There is a growing interest in the development of rational design criteria for bridges. The fundamental problem is evalution of the loads and load carrying capacity. However, load and...
Reliability Bases for Codes for Design of Reinforced Concrete Structures
The American Concrete Institute Standard 318, Building Code Requirements for Reinforced Concrete, has permitted the design of reinforced concrete structures in accordance with limit state...
Reliability Models of the Mohr Failure Criterion for Mass Concrete
Failure in biaxially stressed concrete is here modelled by the Mohr criterion. The reliability of a stress state is evaluated in terms of 2 load variables and 1 or 2 strength variables....
Reliability Analysis of Reinforced Concrete Structures for Serviceability Limit States
Some problems of reliability analysis of reinforced concrete structures in serviceability limit states are discussed, and two reliability analysis methods for serviceability limit states...
Statistical Properties of Prestressed Concrete Beams in Shear
Monte Carlo simulations were performed on prestressed concrete rectangular and tee-section beams in shear produced by a single concentrated load at mid span. The truss analogy model was...
Strategies for Bridge Inspection Using Probabilistic Models
This paper describes the application of probability analyses in planning an inspection program for highway bridges. When damage in the form of fracture and cracking is the major concern,...
Analysis of Bridge Maintenance and Rating Procedures
In the United States, bridges are routinely rated to evaluate their existing conditions. The formula used to evaluate bridges is called the Sufficiency Rating Formula. The formula uses...
Bridge Live Load Models
This paper describes the analysis of weigh-in-motion data and the conclusions drawn. Statistical distributions of the effects induced in typical bridges due to single vehicle events are...
Reliability-Based Bridge Life Assessment
Fatigue considerations have usually entered design codes as a secondary consideration and often under the guise of serviceability limits. Most engineers felt if the maximum stress ranges...
Development of a Safety Assessment System for Steel Bridge Erection Work
In order to secure safe execution of steel bridge erection work, development of a comprehensive checking system to set up safety countermeasures at the stage of construction planning prior...
Redundancy Evaluation of Steel Girder Bridges
The focus of this paper is on the use of redundancy measures in the evaluation of bridge systems. The emphasis is on the definition of system redundancy measures suitable for use by bridge...
Effect of the Uncertainty About the Fatigue Limit on Highway Bridge Reliability
Current fatigue design specifications for welded steel highway bridges subjected to high traffic volumes require the design to be capable of resisting high-cycle, long life conditions...
Probability Based Bridge Safety Analysis
Traditional methods of quantifying safety of highway bridges have been associated with deterministic analysis. However, ascertaining the true measure of safety, or reliability, should...
Return to search