Development of Fragility Curves for Liquefaction
The purpose of this study is to propose a methodology for evaluation of the degree of liquefaction potential and to demonstrate its applicability in constructing fragility curves for liquefaction...

Response Analysis of Crude Oil Transmission Systems
A preliminary analysis of the seismic response of continuous steel pipelines is presented. The Crude Oil Transmission System in the New Madrid Mo. area is choosen as an example. Assumptions...

Identification of a Site-Specific Ground Motion Model
The power spectral density and envelope function of earthquake ground accelerations at a site of interest are determined with the aid of system identification based on information predicted...

Analysis of Earthquake Response at a Site With Uncertain Properties
The problem of earthquake response of a soil deposit with uncertain properties is studied in the paper. Various analysis procedures for handling the dynamic response of an uncertain system...

Risk Assessment of Utility Network Systems Using Expert Opinions
This paper describes the application of an expert opinion and survey approach to the problem identification and risk assessment of engineering systems. The method of expert opinion for...

Probabilistic Analysis of Soil Structures Using Finite Element Method
The authors have developed general-purpose stochastic finite element analysis system, which supports various types of correlation and computes safety index ? by first-order second-moment...

Stochastic Finite Element Analysis for Spatial Variations of Soil Properties Using Kriging Technique
When a reliability analysis for geotechnical problems is performed based on the stochastic finite element method, a proper estimation of spatial variation of soil properties is important...

Stochastic Propagation of Semi-Elliptical Surface Cracks
Random propagation of a semi-elliptical surface crack is investigated as a bivariate stochastic process. Under a few assumptions, a probability distribution of the surface crack propagation...

Reliability-Based Analysis of Shallow Foundations
The effects of different parameters on the reliability of shallow foundations are examined. It is found that the footing depth, the footing length, and the load ratio have almost no effect...

Secure Landfills: Reliability-Based Analysis and Design
A framework is outlined for reliability-based analysis and design of secure landfills. Reliability, R, is the estimated probability landfill leakage, Ql, is below an allowable limit, Qf;...

Bridge Live Load Models
This paper describes the analysis of weigh-in-motion data and the conclusions drawn. Statistical distributions of the effects induced in typical bridges due to single vehicle events are...

On the Dynamic Response of Bridges by Oscillating Vehicles on Rough Surfaces
The spectral theory is applied to the response of bridges under a Poissonian stream of vehicles moving with constant speed over the bridge. The vehicles are modeled as oscillators with...

Downtown in Soft Ground
Critchfield and MacDonald describe the shield excavation of twin bus tunnels 21.25 ft in diameter and 5,000 ft long as part of the Downtown Seattle Transit Project. This $450 million project,...

Advances in Pipeline Materials and Design in Europe and North America
This paper presents an overview of various developments in materials technology and design procedures in the Western Hemisphere over the last 20 years. Some projections for anticipated...

Earth Pressure Acting on Buried Flexible Pipes in Centrifuged Models
Distributions of both normal and tangential earth pressures acting on three flexible model pipes having different wall thicknesses were successfully measured in centrifuge model tests....

Recent Advances in Structural Rehabilitation Techniques for Underground Sewer Pipelines
A great challenge for the coming years, if not decades, will be the repair, renovation and renewal of the existing sewerage systems in the Federal Republic of Germany in the interest of...

Evaluating Thermal Pressure Changes in Liquid Packed Piping
Theoretical and practical issues involved with the phenomenon of thermally induced pressure change in closed piping systems are investigated. The mathematical derivation of the applicable...

Safety Assessment of Welded Pipelines Undergoing Large Ground Deformation
Spatial distribution and modelling of liquefaction induced permanent large ground deformation are presented. The permanent large ground displacement patterns required for the safety assessment...

Prestressed Concrete Pipe Field Test
Strain changes in the prestressing wires and deflections of a 2130-mm-diameter precast (embedded cylinder), prestressed concrete pipe were measured during earth backfilling operations....

Ambiguities and Inanations of Current Plastic Pipe Specifications
This paper discusses current specifications, including materials for plastic pipe as compared to other pipe specifications, including rigid pipe materials. It discusses the ambiguities...

 

 

 

 

Return to search