Risk Assessment of Utility Network Systems Using Expert Opinions
This paper describes the application of an expert opinion and survey approach to the problem identification and risk assessment of engineering systems. The method of expert opinion for...
On the Failure Probabilities of R/C Chimneys
A procedure to estimate failure probabilities of structural systems such as reinforced concrete (R/C) chimneys under severe wind loading which allows for considering realistic correlation...
Nonlinear Dynamic Response of Industrial R/C Chimneys
Gust response factors (GRF) based on nonlinear dynamic analysis including the P? effect are calculated. All sample structures analyzed show clearly that, for wind speeds exceeding the...
Seismic Reliability of Non-Linear Structures with Stochastic Parameters by Directional Simulation
The application of improved Monte Carlo method by Directional Simulation and Importance Sampling is presented with reference to the assessment of seismic fragility of reinforced concrete...
Stochastic Propagation of Semi-Elliptical Surface Cracks
Random propagation of a semi-elliptical surface crack is investigated as a bivariate stochastic process. Under a few assumptions, a probability distribution of the surface crack propagation...
Fatigue Reliability of Prestressed Concrete Bridges
Experimental studies indicate that fatigue is a random phenomenon. Therefore, the approach is based on probabilistic methods. The fatigue life of the prestressed concrete girder is estimated...
Safety Levels of Reinforced Concrete Box Culverts for Installing Power Supply Cables
The authors have examined the applicability of reliability-based design to the existing reinforced concrete box culverts for installing power supply cables. The lowest safety index of...
Reliability Study of Ferrocement Slabs Under Cyclic Loading
A simple probabilistic approach to fatigue strength studies for ferrocement slabs is presented: A preliminary experimental program to obtain the relevant statistics was conducted and the...
An Investigation of Live Loads on Concrete Structures During Construction
Slab formwork live loads include the weight of equipment, construction material storage loads, and impact loads when placing the concrete. In this paper material and equipment loads are...
Probabilistic and Reliability Analysis of Asphalt Concrete Airfield Pavements
A procedure was developed to analyze layered elastic asphaltic concrete airfield pavement systems in terms of probability and reliability. Rosenblueth method is used to estimate the expected...
On the CICIND Code
The CICIND Model Code for Concrete Chimneys was created by CICIND, an international technical association which has as one of its main aims the creation of harmonized internationally accepted...
Code-Implied Structural Safety for Earthquake Loading
A method is described for calculating the probability of failure of reinforced concrete frame structures due to earthquake loading, for use in code calibration exercises. The failure criterion...
Reliability Bases for Codes for Design of Reinforced Concrete Structures
The American Concrete Institute Standard 318, Building Code Requirements for Reinforced Concrete, has permitted the design of reinforced concrete structures in accordance with limit state...
Secure Landfills: Reliability-Based Analysis and Design
A framework is outlined for reliability-based analysis and design of secure landfills. Reliability, R, is the estimated probability landfill leakage, Ql, is below an allowable limit, Qf;...
Reliability Models of the Mohr Failure Criterion for Mass Concrete
Failure in biaxially stressed concrete is here modelled by the Mohr criterion. The reliability of a stress state is evaluated in terms of 2 load variables and 1 or 2 strength variables....
Reliability Analysis of Reinforced Concrete Structures for Serviceability Limit States
Some problems of reliability analysis of reinforced concrete structures in serviceability limit states are discussed, and two reliability analysis methods for serviceability limit states...
Statistical Properties of Prestressed Concrete Beams in Shear
Monte Carlo simulations were performed on prestressed concrete rectangular and tee-section beams in shear produced by a single concentrated load at mid span. The truss analogy model was...
Strategies for Bridge Inspection Using Probabilistic Models
This paper describes the application of probability analyses in planning an inspection program for highway bridges. When damage in the form of fracture and cracking is the major concern,...
Reliability Assessment and Reliability-Based Rating of Existing Road Bridges
A practical reliability model for the safety assessment and rating of existing R.C. bridges are developed by explicitly incorporating the degree of deterioration and damages based on available...
Vibration Tests and Damage Detection of P/C Bridges
A three-span countryside P/C bridge has been found to have excessive deflections in two of the three spans. It is reported that the prestresses in tendons of two girders of different spans...
Return to search