A Practical Design and Construction of Tension Rod Supported Glazing
In designing a glass skin-covered space, for the atrium, entrance hall or other core part of a building complex, the high openness and quality requirements of the space often lead to the...
Form Finding Numerical Methods for Tensegrity Systems
The rigidification of Tensegrity Systems is related to selfstress states which can be achieved only when geometrical and mechanical requirements are simultaneously satisfied. This paper...
Direct and Modal Analyses for Shape-Finding of Unstable Structures
Shape-finding analysis of unstable structures has been presented by using generalized inverse (Tanaka and Hangai, 1986). The 'Modal Analysis' using rigid body modes is elegant, but the...
A Shape-Finding Finite Element Analysis for an Equally-Stressed Surface in Membrane Structures
A finite element method is proposed to obtain an equally-stressed surface in a membrane structure, where the displacements and rotations of a membrane are in general finite and nonlinear....
Vibration Characteristics of Suspension Membrane Structures
The present paper specifies fundamental vibration characteristics obtained from experiment on the model of the suspension or the framed membrane structure. The first paragraph describes...
Study on Structural Characteristics of Air-Inflated Beam Structures
The purpose of this paper is to clarify the structural characteristics of nonlinear load-carrying behaviors of air-inflated beam structures in their finite deflection range and after wrinkles...
Expandable Structures with Incorporated Roofing Elements
In this paper design aspects of expandable structures with incorporated cover plates are studied. These roofing elements can be made by single plates or by self-folding plates. In both...
Elasto - Plastic Analysis of Cable Net Structures
This paper presents a Newton-Raphson interaction technique which takes account of plastic cable strains while iterating on the nodal equilibrium equations of cable net structures. The...
Intermediate Support Cable Logging Systems
Cable systems for the transportation of fresh cut logs often employ existing trees as intermediate supports for the main support cable. Failure of these support trees is life threatening...
Design and Construction of the Cable-Stayed Wooden Space Truss Roof
The thinning must be enforced for healthy development of an artificial forest. The most effective use of thinning lumber is construct of the space truss structure. This election systems...
Concrete Shells Today
Providing high structural qualities, modern shells using experimental forms will attract new attention due to their limitless repertory. Presented is a new form of construction, instead...
Nonlinear Behavior of Northlight Reinforced Concrete Shells
The behavior of northlight shells is very sensitive to the boundary conditions at the top and bottom edges of the shell. The aim of this paper is to investigate the structural action of...
Study on Reinforced Concrete Cylindrical Shells with Edge Members under Impact Loading
The strength, cracking patterns and the other nonlinear dynamic behaviors of reinforced concrete roof-type circular cylindrical shells influenced by edge member stiffness and supporting...
Nonlinear Analysis of a Reinforced Concrete Folded Plate Structure
This paper deals with the ultimate load analysis of a reinforced concrete (RC) folded plate shell subjected to dead load and monotonically increasing live loads, statically applied, using...
Spatial Structures Erected out of Thin Shell Elements Fabricated on Plane Followed by Bending
The paper offers the examples of spatial structures of average spans (up to 24 m) and engineering structures made of prefabricated curvilinear elements originally having a plane form....
Ultimate Strength of R/C Cooling Tower Shell
Reinforced concrete(R/C) cooling towers are the largest, thin shell structures. It is important to assess the ultimate strength of R/C cooling tower shells subjected to wind load. In the...
Repair of a Cracked Cooling Tower Shell Based on Numerical Simulations
The present condition of a 30 years old cooling tower shell made of reinforced concrete is characterized by a relatively large number of long, thermally induced meridional cracks. For...
Design for Durability for Large Reinforced Concrete Shells
Classical design concepts restrict themselves to sufficient structural safety, using linear analysis methods. Durability questions are mainly treated independently. Modern computer simulations...
Punching Shear of Reinforced Concrete Shell Structures
In reinforced concrete shells punching shear failure may take place, if heavy concentrated loads are applied. Such failure is undesirable, since it does not provide adequate warning and...
Stability Analysis of Stiffened Plates and Shells
A stability analysis of stiffened plates and shells by using degenerated finite elements is presented. The studies are based on a thin shell theory, large deflections, but on an elastic...
Return to search