Lifetime-Maximum Load Effect for Highway Bridges Based on Stochastic Combination of Typical Traffic Loadings
An efficient and accurate method is proposed for probabilistic assessment of lifetime maximum load effect on highway bridges caused by traffic load. Probability distribution of the lifetime...
Probabilistic Traffic Load Models and Extreme Loads on a Bridge
This paper contains a summary of the intensive traffic measurements collected in France and Europe, and of the probabilistic distributions adopted for the main parameters. The evaluation...
Reliability-Based LRFD For Bridges: Theoretical Basis
This paper develops a theoretical basis for obtaining probability-based load combination criteria for structural design. For choosing the load combinations and for determining the factors...
Probabilistic Evaluation of Load Factors for Steel Rigid-Frame Piers on Urban Expressway Network
A procedure is proposed for calculating the optimal load factors for steel rigid-frame piers using the extended level 2 reliability method. Twelve typical types of pier structures are...
Probabilistic Basis for Bridge Design Codes
There is a growing interest in the development of rational design criteria for bridges. The fundamental problem is evalution of the loads and load carrying capacity. However, load and...
Strategies for Bridge Inspection Using Probabilistic Models
This paper describes the application of probability analyses in planning an inspection program for highway bridges. When damage in the form of fracture and cracking is the major concern,...
Analysis of Bridge Maintenance and Rating Procedures
In the United States, bridges are routinely rated to evaluate their existing conditions. The formula used to evaluate bridges is called the Sufficiency Rating Formula. The formula uses...
Bridge Live Load Models
This paper describes the analysis of weigh-in-motion data and the conclusions drawn. Statistical distributions of the effects induced in typical bridges due to single vehicle events are...
Reliability-Based Bridge Life Assessment
Fatigue considerations have usually entered design codes as a secondary consideration and often under the guise of serviceability limits. Most engineers felt if the maximum stress ranges...
Development of a Safety Assessment System for Steel Bridge Erection Work
In order to secure safe execution of steel bridge erection work, development of a comprehensive checking system to set up safety countermeasures at the stage of construction planning prior...
Redundancy Evaluation of Steel Girder Bridges
The focus of this paper is on the use of redundancy measures in the evaluation of bridge systems. The emphasis is on the definition of system redundancy measures suitable for use by bridge...
Effect of the Uncertainty About the Fatigue Limit on Highway Bridge Reliability
Current fatigue design specifications for welded steel highway bridges subjected to high traffic volumes require the design to be capable of resisting high-cycle, long life conditions...
Probability Based Bridge Safety Analysis
Traditional methods of quantifying safety of highway bridges have been associated with deterministic analysis. However, ascertaining the true measure of safety, or reliability, should...
Reliability Assessment and Reliability-Based Rating of Existing Road Bridges
A practical reliability model for the safety assessment and rating of existing R.C. bridges are developed by explicitly incorporating the degree of deterioration and damages based on available...
Reliability and Redundancy Assessment of Prestressed Truss Bridges
Methods for the assessment of the reliability and redundancy of post-tensioned trusses are suggested. The effect of tendon layout on the reliability and redundancy of post-tensioned trusses...
On the Dynamic Response of Bridges by Oscillating Vehicles on Rough Surfaces
The spectral theory is applied to the response of bridges under a Poissonian stream of vehicles moving with constant speed over the bridge. The vehicles are modeled as oscillators with...
Approximate Reliability Analysis of Highway Bridges Under the Action of Random Vehicles?In Relation to an Interchange Bridge of China
In relation to an interchange curved bridge of China, a simple method by FSE for analysis of stochastic vibration has been proposed. The random vibration characteristics of bridge structures...
Reliability of a Suspension Bridge Under Traffic Flow
The problem of reliability of a single-span spatial suspension bridge under random highway traffic is considered. The displacements of the bridge are described by coupled, non-linear,...
Research on Structural System Reliability of Cable-Stayed P.C. Railway Bridge Across Hong-Shui River
This paper analyses the structural system reliability of cable-stayed bridge by using the modified all failure modes. The concept of the structural subsystem is used to help the selection...
Vibration Tests and Damage Detection of P/C Bridges
A three-span countryside P/C bridge has been found to have excessive deflections in two of the three spans. It is reported that the prestresses in tendons of two girders of different spans...
Return to search