Seismic Isolation of a Flight Simulator Manufacturing Facility
The corporate headquarters of Evans & Sutherland is located in the University of Utah Research Park which is in Salt Lake City, Utah. A major fault runs through Salt Lake City...
Special Bedrock Conditions and a Foundation Project in Greater Boston
In the greater Boston area the argillite bedrock and/or the overlying glacial till provide suitable support for a wide range of foundation systems, including high capacity end-bearing...
Facilities Management With CADD
Tyson led a project that began in 1985 to develop an integrated alphanumeric and graphic database for facilities management at Stanford University. Many large institutions could benefit...
University-Industry Cooperation for Effective Education and Research in CAD/CAM
It is well known that, for successful conception, manufacture, and marketing of a new product, design and manufacturing activities must be closely coordinated. Decisions made at the design...
Manufacturing Development Requires New Graduate-Level Education
Manufacturing engineering education varies widely with different countries. In some it is looked upon as a non-academic subject, while in others a large number of engineers are being trained...
Using a CAM System for Generating Potential Solutions in Machining Processes
This paper presents a software package which was designed to generate potential solutions for producing specific machine shapes as an application of a Computer Aided Manufacturing (CAM)...
LAN Implementation in a Teaching Laboratory for Computer Integrated Manufacturing
The CIM (Computer Integrated Manufacturing) lab at Western Washington University contains a miniature factory with five robotic workcells and eight computers representing various departments...
CIM Education Through Industry/University Collaboration
This paper outlines the strategy of university/industry collaboration adopted by the University of Missouri-Rolla in successfully developing its Computer Integrated Manufacturing (CIM)...
ROBOSIM: A Simulation Package for Robots
ROBOSIM was developed first in a VAX environment. Using PC's with a terminal program capable of emulating a TEKTRONIX 4014, students can create robots, see them graphically,...
Risk of Waterborne Infectious Illness Associated with Diving in the Point Loma Kelp Beds, San Diego, CA
There is considerable interest in estimating the risk of bacterial and viral illness (i.e., disease, infection) associated with scuba diving in the Point Loma kelp beds located within...
Technical Evaluation of a Copper:Silver Ion Swimming Pool Disinfection Unit
The paper reports on an investigation of a mock swimming pool setup on a laboratory scale. The study used indoor and outdoor simulated swimming pools to compare the efficacy of electrolytically...
Application of the ASPEN System for Simulation of the Detroit Waste Water Treatment Plant
The objective of this study is to simulate the Detroit Wastewater Treatment Plant (DWWTP) using the Advanced System for Process Engineering (ASPEN). The primary treatment facility has...
Radioactive Mixed Waste at the Waste Isolation Pilot Plant
This paper discusses compliance by the U.S. Department of Energy Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico with the Resource Conservation and Recovery Act (RCRA) (1)....
Long-term Land Treatment: A Performance Evaluation
Overland flow (OLF) land treatment has been applied effectively in the United States for the treatment of industrial and municipal wastewaters. Although several overland flow systems in...
Generation of Compromise Alternatives Between Maximum Benefits and Maximum Acceptance
This paper proposes a procedure to generate a set of compromise alternative solutions between maximization of benefits and maximization of acceptance. A small set of near optimal strategies,...
Development of a Large Network Model to Evaluate the Yield of a Proposed Reservoir
The model simulates the operation of the Colorado River system upstream of Grand Junction, Colorado, and both the West Slope and the East Slope components of Colorado-Big Thompson system....
Ports '89
This is a collection of the technical papers presented at the triennial Ports '89 Conference held in Boston, Massachusetts in May 1989. Authors, although predominantly from...
World Class Manufacturing and Hydro-Electric Production
Operations, maintenance, and administration and support services can benefit from the concepts of World Class Manufacturing. Cellular organizational concepts whether its machines, people,...
Evaluation of Hydro Facilities for Sale to Another Utility
STS Hydropower had been contacted by a major industrial client near one of the STS regional offices for the purpose of evaluating both the technical and financial status of several operating...
Turbine Runner Procurement for the Robert Moses Niagara Power Plant Upgrade
Procurement of the new runners involved the selection of two manufacturers who have entered into a design competition in which competing models will be tested in an independent hydraulic...
Return to search