Evaluation of Software for Analysis and Design of Reinforced Concrete Structures
A study to verify the accuracy of two structural analysis and concrete design programs and to evaluate their functionality was conducted. The evaluation was based on a comparison of results...
Discrete Modeling of Soil-Structure Interaction Under Dynamic Loading
A proposal of discrete modeling useful to describe behavior of structures burried in the ground under air explosion is presented. In the modeling emphasis is laid on determining the space...
The Development of an Expert System Used in Preliminary Design of Concrete Bridges
The importance of the selection of the best design on the one hand and the available knowledge, on the other during the preliminary design process asks after a different kind of software...
Time-related Deflections of Cantilever Bridges
Many prestressed concrete bridges with spans between 100 and 160 m have been built in the Netherlands. The method of construction is the so-called in situ free cantilever construction....
Characteristics of the US Highway Bridge Population
Characteristics of US highway bridges are summarized, and conditions of national, regional, and state bridges are analyzed with respect to structural deficiency. The overall patterns in...
Seismic Analysis of Reinforced Concrete Building Using Finite-element Techniques
The response of a reinforced concrete building subjected to earthquake loading has been obtained on a personal computer using the finite-element code STARDYNE. For preliminary design,...
Developing an Object Based Planning System for Precast Concrete Building Structures
This paper presents the organization of an object based planning system for determining the preliminary costs, schedules and resources for precast concrete building structures. First,...
Macroelement Model for Shear Wall Analysis
An efficient modeling scheme for static and dynamic analysis of reinforced concrete shear walls in the inelastic range is presented. The macroelement model of the shear wall is composed...
The BS8110 CAL Program for Teaching RC Design
This paper describes the main features of RC-CAL, a computer-aided-learning courseware for reinforced concrete design to BS8110, the British Code of Practice. Results of an evaluation...
Rotating Crack Model and Fracture in a R/C Medium
In this study the potential of the development of cracks in the members of a reinforced concrete large panel structure is considered. The analysis is carried out using finite element modeling...
Deformations in Sand Layer During Pile Driving
This paper presents measurements of settlement and lateral soil movements in a medium dense to dense sand layer due to densification during driving of precast concrete piles. At one end...
Measured Downdrag on Seven Coated and Uncoated Piles in New Orleans
A site outside of New Orleans, Louisiana was selected as part of a research effort to study the phenomenon of downdrag on bitumen-coated piles. Two steel pipe piles, two timber piles,...
In Situ Treatment of VOCs by Recirculation Technologies
Confronted with contaminated land from the world wars and the postwar industrialization period, German researchers and practicing professionals have worked to develop processes for effective...
Hydraulic Model Studies of Recessed Curb Inlets and Bridge Drains
A large hydraulic model (64 ft long by 10.5 ft wide) was used to test several geometries of recessed curb inlets and three types of bridge drains. Testing was at 3/4 scale for the recessed...
Energy Dissipation for a RCC Stepped Spillway
A two-dimensional physical model study was used to quantify the kinetic energy dissipation of the steps in a roller compacted concrete (RCC) stepped spillway. The steps were effective...
Bed Load Prediction in Steep Mountain Rivers
The characteristics of the stream channel morphologies in a very steep mountain ravine are explained by the data obtained through the longterm field observation. The bed load transportation...
Velocity Control Rings for RC Pipe on Steep Slopes
This paper discusses the use of internal concrete rings to reduce velocity and concrete erosion for reinforced concrete pipes on steep slopes in the Southern California area....
Laplace Valve Stroking for Complex Piping Systems
LaPlace valve stroking to control water hammer is applied in complex piping systems with friction and without friction. Two types of system are analyzed. The law of operation of the valves...
Investments in the Future
The projects that earned the 1994 Outstanding Civil Engineering Achievement Awards of Merit were improvements to the nations transportation and environmental infrastructures. On the outskirts...
Chicago's Waterfalls
The 1994 Outstanding Civil Engineering Achievement Award goes to successful implementation of an elegantly simple idea: aerate sluggish water by letting it fall through man-made waterfalls....
Return to search