Adding Up Admixtures
The importance of preventive maintenance and lifecycle costs has put added emphasis on concrete performance. For many specifiers, chemical admixtures, added to concrete at the batch plant,...
Probabilistic Evaluation of Bearing Capacity of Shallow Foundations
A probabilistic model is developed to evaluate the bearing capacity of shallow foundations. The bearing capacity formulation proposed by Terzaghi is used but with the bearing capacity...
Fatigue Strength of Welded Joints Under Broadband Loadings
Twelve welded high strength steel cruciform specimens were tested under stochastic loadings to determine the influence on fatigue life of the bandwidth of the loading process. Constant...
A New Probabilistic Model for the Fracture Toughness of Concrete
Scatter of strength and toughness parameters as well as scale effect are often observed in brittle materials such as concrete. The recently developed Crack Diffusion Model is utilized....
Taming Tornado Alley
Some structures�such as nuclear power plants�need complete protection from tornadoes regardless of the high costs of design and construction. Public facilities need protection too, but...
Use of the Break-Off Method for the Evaluation of High Performance Concrete
The Break-Off test is one of the recent developments for testing in-place concrete strength. This research was undertaken to investigate the reliability of the Break-Off test as a measure...
Application of SMA Technology in Georgia
In 1991, the Georgia Department of Transportation participated in a cooperative effort with the Federal Highway Administration to conduct one of a series of field evaluations of Stone...
A Laboratory Investigation on Long-Term Performance of Asphalt Concrete Treated with Antistripping Additives
Asphalt concrete pavement is susceptible to moisture damage and the damage caused by repeated freeze-thaw cycles is a major problem. This paper summarizes a laboratory investigation for...
Realistic Specifications for Manufactured Sand
Data which demonstrate the beneficial effect of using fine aggregate having high fines contents on concrete properties are presented. All data indicate that the use of a high fines content...
High Strength, Low Permeability Garage Rehab Concrete
Physical and engineering properties of high strength structural lightweight concrete used to replace deteriorated concrete in garage structure rehabilitation programs are reported. Structurally...
Concreting at Subfreezing Temperatures
Temperature affects the rate at which portland cement concrete develops strength. Below about 20?C, strength gain is retarded, whereas at higher temperatures it is accelerated. Strength...
Implementation of Material Requirements in Specifications
This paper focuses on where to find information on materials, their compatibility, minimum standards and specifying of materials and their use. The paper also presents case histories on...
Unidirected Twined-Strand Composites and Their Uses
Twined strand composites are a new class of unidirected continuous-fiber-reinforced composite materials where the orientation of the continuous fibers is a twine of unidirected helically...
Bond Strength of Straight GFRP Rebars
An overview of a study on bond of straight Glass-fiber-reinforced-plastic (GFRP) rebars to concrete is presented. The 54 specimens to be tested include several variables, such as the mode...
Behavior of Externally Confined Concrete Columns
This paper investigates the feasibility of strengthening of seismically deficient concrete columns with high-strength fiber composite straps. The concrete columns will be externally confined...
Fiber/Epoxy Composites Strengthen Bridge Columns
The California Department of Transportation is using high strength fiber/epoxy composites to strengthen existing reinforced concrete bridge columns. These advanced composite materials...
Stability and Performance of Slopes and Embankments II
This proceedings,
Cyclic Behavior of a Deepwater Normally Consolidated Clay
A comprehensive advanced laboratory testing program was undertaken to study the cyclic behavior of clays under various combinations of one-way and two-way cyclic loading. This work was...
A New Concrete Armor Unit for Breakwaters: The Beta Block
The aim of this paper, is to present a new artificial block for the protection of breakwaters. This armor unit, named BETA, has been designed and tested in the Coasts and Harbors Studies...
Response Statistics of Tension Leg Platforms Under Wind Loads
This paper presents the direct integration method and Kac-Siegert technique to solve the first four cumulants in the general quadratic systems, and proposes the splitting technique to...
Return to search