Frequency Domain Site Response with Pore Pressure
A frequency domain analysis for seismic site response and liquefaction potential is developed. The analysis is based upon a nonstationary random vibration theory. The model uses an effective...
Probabilistic Load Combinations in Nuclear Structures
A variety of loads affect a nuclear power facility during its lifetime. The magnitudes or intensities of these loads are uncertain, and for some of them, their time of occurrence is also...
Dependence of Fatigue Damage on Loading Amplitude Variability
Welded steel specimens have been tested under variable amplitude loadings to determine the extent to which fatigue life is affected by the rate of amplitude variability of the loading...
Statistics of Concrete Shrinkage Test Data
The paper reports a large series of concrete shrinkage tests which can be used for statistical purposes. The series involves two groups of 36 identical cylindrical specimens, with a diameter...
On Response Spectrum Approach for Nonclassically Damped Structural System
A response spectrum approach to approximate the maximum response of nonclassically damped structural systems is presented. The maximum response is expressed in terms of the sine spectrum,...
Bridge Reliability Evaluation Using 3-D Analysis and Damage Scenarios
This paper reports analytical investigations into the system strength and reliability evaluation of existing bridges using 3-D inelastic analysis and damage scenarios. In this context,...
Bridge Reliability?Evaluation vs. Design
Probabilistic methods of structural safety are being widely accepted as a basis for rationally considering uncertainties and developing reliability based design specifications for various...
Dynamic Maps for Seismic Risk Reduction and Effects of Soil Conditions
In order to perform useful vulnerability and risk evaluations, it is essential to have at one's disposal an automatic procedure of elaboration which provides answers in real time as soon...
A Stochastic Seismological Model in Earthquake Engineering
Recent studies of source mechanisms and wave propagation models enable one to generate strong motions based on deterministic source and source-to-site characteristics. The normal mode...
Practical Implementation of Seismic Probabilistic Risk Assessment
Many techniques for seismic probabilistic risk assessment have been developed by university researchers over the last decade. This paper reports on a study being conducted to determine...
Autoregressive Model of Spatially Propagating Earthquake Ground Motion
An autoregressive random process model was used to investigate a simulation method of spatially and temporally variative ground motion when characteristics of motion are prescribed by...
Applications of ARMA Models for Seismic Damage Prediction
As an alternative to current design practice which is based on peak measured ground motions and scaled records from different events, individual earthquake records are treated as samples...
Actual Versus Assumed Behaviour of Girder Bridges
It is generally believed that the discrepancies between calculated and actual responses of bridges can diminish, to the point of being nonexistent, with refinement in the method of analysis....
Design Wind Loads for Broadcasting Antennas from Short Time Records
Very useful would be procedures for the determination of the design wind load on the basis of short time records, of duration comparable with the preliminary and/or design phases, so that...
A Tower-Like Structure with Distributed Stiffness, Mass and Plastic Zones Under Random Earthquake Loading
Random vibrations of an elastoplastic structure are treated by taking into account the finite spread of plastic zones as well as the effects of distributed mass and stiffness. Solution...
Bayesian Updating of Seismic Fragilities of Nuclear Power Plant Components
Seismic fragility is represented by a curve of the conditiional probability of failure as a function of the peak ground acceleration. Since there are many uncertainties in the model and...
Outcrossing Rates By Point Crossing Method
The point crossing method is applied to compute outcrossing rates for general safe domains, i.e., nonlinear load combinations problems. For stationary processes the method typically yields...
Field Testing of Selected Urban BMP's
This paper presents the results of field sampling of two urban BMP's (Best Management Practice), namely, a wet detention pond and a level spreader/vegetative buffer strip...
Drawing up Waterproof Curtains
Curtain wall damage has recently become the number one source of building owner complaints. Until wall systems are designed with backup water collection systems and other details, leakage...
Dilatometers Settle In
The benefits of the dilatometer test DMT are described. This geotechnical in situ testing tool was developed and patented by an Italian professor and engineer named Silvano Marchetti....
Return to search