Analysis and Optimum Design of Nondeterministic Structures under Random Loads
The importance of analyzing and designing structural systems by using a reliability-based approach is emphasized, including system safety requirements with regard to both serviceability...
Animated Response of Dynamic Systems
Understanding how a simple structural system responds to a dynamically applied load is a difficult concept for most students to grasp. The fundamental mathematical theory of this behavior...
Nonlinear Analysis of RC Panels Under In-Plane Loading
A new concrete material model based on a modified Mohr-Coulomb criterion is proposed for the nonlinear analysis of reinforced concrete panels. Emphases are made on the softening behavior...
Shear Mobilization on Laterally Loaded Shafts
From the results of a pressure cell instrumented rigid shaft embedded in stiff clay and subjected to horizontal static loading the side shear mobilization rate, and its contribution to...
Seismic Acceleration Maps for Oregon
To evaluate the seismic hazard for the Corps dams in the Portland District, operating basis earthquakes (OBE) and maximum credible earthquakes (MCE) were established for seismic zones...
Seismic Resistance of an Elevated Water Tank?A Case Study
Current knowledge of earthquake risk and structural response has raised concern about the safety of elevated water storage tanks which were constructed several decades ago. This paper...
Attaching Steel Members to Reinforced Concrete Elements
A variety of structural systems have been devised to strengthen existing buildings for improved seismic resistance. Strengthening methods currently in use for reinforced concrete structures...
RC Structures Under Severe Loads?An Expert System Approach
The authors propose the application of expert systems to the post-test assessment of specific structural systems. In the study reported, an existing expert system shell was employed and...
U.S.-Japan Coordinated Program on Masonry Research
An overview of the U. S. -Japan Coordinated Program on Masonry Research is presented. The program consists of parallel efforts in Japan and the United States to develop design methods...
Pseudo-Dynamic Testing of Structural Components
The pseudo-dynamic testing procedure is a simultaneous simulation and control process in which inertia and damping properties are simulated and flexibility properties are acquired from...
Nonlinear Behavior of Precast Concrete Shear Walls under Simulated Earthquake Loading
This paper presents experimental and analytical results on precast concrete shear walls under earthquake loading. It was observed in both small scale models tested and the computer analysis...
Hysteretic Behavior of Composite Diaphragms
Floor systems constructed with steel-deck-reinforced concrete are described. When used to resist lateral loads these systems are referred to as diaphragms. A description of a test arrangement,...
Precast Roofs for Blast Shelters
A shallow-buried reinforced concrete blast shelter has been constructed and dynamically tested at the U. S. Army Engineer Waterways Experiment Station (WES). Three thicknesses of precast...
Cyclic Energy Absorption by Reinforced Concrete
Results are presented on the basis of experiments conducted on conventional and steel fibrous reinforced concrete beams. The effects of the amount and nature of steel reinforcement and...
Significance of Nonlinear Modeling of R/C Columns to Seismic Response
Columns in reinforced concrete (R/C) structures exhibit complex hysteretic behavior during earthquakes. This can significantly influence predictions of overall response and damage distribution....
Refinements in Pseudo-Dynamic Test Procedures
One of the major concerns in seismic testing is whether the loading conditions imposed on a structure adequately represent those that might occur during a major earthquake. Response simulation...
Use of Vibration Tests to Determine Lateral Load Paths in Medium Rise Buildings
A structural system identification procedure is described in which an initial analytical model of a building is modified until it predicts accurately the mode shapes and natural frequencies...
Some Experimental Results on the Dynamic Behaviour of a 40m Guyed Mast
This paper presents the first results and elaborations obtained from the tests of an experimental 40m tall guyed mast. The instruments installed to date are a cup anemometer on the mast...
Performance of Existing Buildings: Results of Benchmark Structure Analyses Performed in U.S.-Japan Workshops
In response to the need for better understanding of current safety evaluation methodologies, three U. S. -Japan workshops have been conducted on the evaluation of the performance of existing...
Three Phase Design for Wind Loads on Structures
The successful design of a structure requires three phases of work. These phases are: conceptual design, design development and design verification. The conceptual design is undertaken...
Return to search