A Statistical Model for Predicting Fatigue Life of Graphite/Epoxy Laminates
A failure stiffness criterion and a residual stiffness degradation model are proposed from which the statistical distribution of the fatigue life of composite laminates is derived. Experiments...
On Response Spectrum Approach for Nonclassically Damped Structural System
A response spectrum approach to approximate the maximum response of nonclassically damped structural systems is presented. The maximum response is expressed in terms of the sine spectrum,...
Bridge Reliability Evaluation Using 3-D Analysis and Damage Scenarios
This paper reports analytical investigations into the system strength and reliability evaluation of existing bridges using 3-D inelastic analysis and damage scenarios. In this context,...
Bridge Reliability?Evaluation vs. Design
Probabilistic methods of structural safety are being widely accepted as a basis for rationally considering uncertainties and developing reliability based design specifications for various...
Dynamic Maps for Seismic Risk Reduction and Effects of Soil Conditions
In order to perform useful vulnerability and risk evaluations, it is essential to have at one's disposal an automatic procedure of elaboration which provides answers in real time as soon...
A Stochastic Seismological Model in Earthquake Engineering
Recent studies of source mechanisms and wave propagation models enable one to generate strong motions based on deterministic source and source-to-site characteristics. The normal mode...
Practical Implementation of Seismic Probabilistic Risk Assessment
Many techniques for seismic probabilistic risk assessment have been developed by university researchers over the last decade. This paper reports on a study being conducted to determine...
Applications of ARMA Models for Seismic Damage Prediction
As an alternative to current design practice which is based on peak measured ground motions and scaled records from different events, individual earthquake records are treated as samples...
Actual Versus Assumed Behaviour of Girder Bridges
It is generally believed that the discrepancies between calculated and actual responses of bridges can diminish, to the point of being nonexistent, with refinement in the method of analysis....
Design Wind Loads for Broadcasting Antennas from Short Time Records
Very useful would be procedures for the determination of the design wind load on the basis of short time records, of duration comparable with the preliminary and/or design phases, so that...
Bayesian Updating of Seismic Fragilities of Nuclear Power Plant Components
Seismic fragility is represented by a curve of the conditiional probability of failure as a function of the peak ground acceleration. Since there are many uncertainties in the model and...
Fatigue Reliability of Ship Hull Girder
Based on estimates on uncertainties in wave loading and fatigue capacity the fatigue reliability of ship hull girder is calculated with respect to global vertical wave bending moment....
Rainflow Cycles in Nonstationary Gaussian Processes
This paper develops a methodology for calculating the probability distribution for rainflow cycles in a nonstationary Gaussian process. The up- and downcrossing rates are estimated for...
Markov Approximation to Fatigue Crack Propagation
The distribution of the time required by a crack to reach a specified length and the distribution of the crack size itself are determined. To this end, the fatigue crack propagation growth...
Outcrossing Rates By Point Crossing Method
The point crossing method is applied to compute outcrossing rates for general safe domains, i.e., nonlinear load combinations problems. For stationary processes the method typically yields...
Field Testing of Selected Urban BMP's
This paper presents the results of field sampling of two urban BMP's (Best Management Practice), namely, a wet detention pond and a level spreader/vegetative buffer strip...
Drawing up Waterproof Curtains
Curtain wall damage has recently become the number one source of building owner complaints. Until wall systems are designed with backup water collection systems and other details, leakage...
Dilatometers Settle In
The benefits of the dilatometer test DMT are described. This geotechnical in situ testing tool was developed and patented by an Italian professor and engineer named Silvano Marchetti....
Corrosion Monitoring of Critical Service Pipelines
Corrosion, including microbiologically influenced corrosion (MIC), is receiving much attention as a significant piping material performance concern particularly for critical service pipelines...
An Investigation of Field Performance of Reinforced Plastic Mortar Pipes
Every year many new pipe materials appear on the market for various applications. One of the important factors the design engineer and the user should consider while evaluating new products...
Return to search