Analysis and Design of Prestressed Concrete Spun Poles
A microcomputer package for the analysis and design of prestressed concrete spun poles is described. The package, named PCPAD, consists of six programs each having a specific analysis...
Practical Modeling of Bar Slippage in R/C Joints
A procedure based on the displacement method of analysis has been developed for analyzing the behavior of beam reinforcement crossing the interior beam-column connections under seismic...
Scenic Squeeze
Constructing a four-lane dual highway through the 12 miles of Colorado's Glenwood Canyon involves several engineering innovations: cantilevered roadways, unusual retaining...
Transitioning End Terminal A TRENDtm for the Future
The highway engineer frequently starts from a position where an identified highway element is causing serious injuries or fatalities to motorists on the nation's highways....
Rowes Wharf: A Case Study in Substructure Innovation
Rowes Wharf is a project with many unique features. This paper has attempted to briefly review just one of these features - Up/Down construction. The willingness of the development team...
Demands for Innovation in Power Construction
This paper identifies some specific demands for innovation on power projects, reviews the alternatives considered to meet project objectives, and describes the resulting innovations. Examples...
Attaching Steel Members to Reinforced Concrete Elements
A variety of structural systems have been devised to strengthen existing buildings for improved seismic resistance. Strengthening methods currently in use for reinforced concrete structures...
Design of an Expert System for the Rating of Highway Bridges
A microcomputer-based expert system used to determine the effects of vehicles and overloaded vehicles on simple span bridges with reinforced concrete deck and prestressed concrete I-beams...
RC Structures Under Severe Loads?An Expert System Approach
The authors propose the application of expert systems to the post-test assessment of specific structural systems. In the study reported, an existing expert system shell was employed and...
Pseudo-Dynamic Testing of Structural Components
The pseudo-dynamic testing procedure is a simultaneous simulation and control process in which inertia and damping properties are simulated and flexibility properties are acquired from...
Nonlinear Behavior of Precast Concrete Shear Walls under Simulated Earthquake Loading
This paper presents experimental and analytical results on precast concrete shear walls under earthquake loading. It was observed in both small scale models tested and the computer analysis...
Hysteretic Behavior of Composite Diaphragms
Floor systems constructed with steel-deck-reinforced concrete are described. When used to resist lateral loads these systems are referred to as diaphragms. A description of a test arrangement,...
Precast Roofs for Blast Shelters
A shallow-buried reinforced concrete blast shelter has been constructed and dynamically tested at the U. S. Army Engineer Waterways Experiment Station (WES). Three thicknesses of precast...
Floating Bridges in Short-Crested Random Seas
Four large concrete floating bridges located in Washington State have been the subject of extensive analytical modeling for dynamic response to storm waves. The dynamic analysis of the...
Cyclic Energy Absorption by Reinforced Concrete
Results are presented on the basis of experiments conducted on conventional and steel fibrous reinforced concrete beams. The effects of the amount and nature of steel reinforcement and...
Significance of Nonlinear Modeling of R/C Columns to Seismic Response
Columns in reinforced concrete (R/C) structures exhibit complex hysteretic behavior during earthquakes. This can significantly influence predictions of overall response and damage distribution....
Use of Vibration Tests to Determine Lateral Load Paths in Medium Rise Buildings
A structural system identification procedure is described in which an initial analytical model of a building is modified until it predicts accurately the mode shapes and natural frequencies...
Behaviour of Full-Scale Reinforced Concrete Structure on Realistic Foundation
A full-scale seven-story reinforced concrete building, tested as a part of U. S. -Japan Cooperative Research Program, performed well even under a severe earthquake loading condition. Nonlinear...
Modeling 3-D Response in R/C Frame-Wall Structures
As part of the recent U. S. -Japan Cooperative Research Program on the seismic performance of buildings, a 1/5-scale model of a 7-story reinforced concrete frame-wall structure, was constructed...
Earthquake Response of Five Story Reinforced Concrete Masonry Test Building
In 1986, a full-scale five story reinforced masonry test building is to be constructed in the Japan Building Research Institute Large-Scale Structure Test Laboratory, and through 1987...
Return to search