Reliability-Based Bridge Life Assessment
Fatigue considerations have usually entered design codes as a secondary consideration and often under the guise of serviceability limits. Most engineers felt if the maximum stress ranges...
Development of a Safety Assessment System for Steel Bridge Erection Work
In order to secure safe execution of steel bridge erection work, development of a comprehensive checking system to set up safety countermeasures at the stage of construction planning prior...
Redundancy Evaluation of Steel Girder Bridges
The focus of this paper is on the use of redundancy measures in the evaluation of bridge systems. The emphasis is on the definition of system redundancy measures suitable for use by bridge...
Effect of the Uncertainty About the Fatigue Limit on Highway Bridge Reliability
Current fatigue design specifications for welded steel highway bridges subjected to high traffic volumes require the design to be capable of resisting high-cycle, long life conditions...
Probability Based Bridge Safety Analysis
Traditional methods of quantifying safety of highway bridges have been associated with deterministic analysis. However, ascertaining the true measure of safety, or reliability, should...
Reliability Assessment and Reliability-Based Rating of Existing Road Bridges
A practical reliability model for the safety assessment and rating of existing R.C. bridges are developed by explicitly incorporating the degree of deterioration and damages based on available...
Reliability and Redundancy Assessment of Prestressed Truss Bridges
Methods for the assessment of the reliability and redundancy of post-tensioned trusses are suggested. The effect of tendon layout on the reliability and redundancy of post-tensioned trusses...
On the Dynamic Response of Bridges by Oscillating Vehicles on Rough Surfaces
The spectral theory is applied to the response of bridges under a Poissonian stream of vehicles moving with constant speed over the bridge. The vehicles are modeled as oscillators with...
Approximate Reliability Analysis of Highway Bridges Under the Action of Random Vehicles?In Relation to an Interchange Bridge of China
In relation to an interchange curved bridge of China, a simple method by FSE for analysis of stochastic vibration has been proposed. The random vibration characteristics of bridge structures...
Reliability of a Suspension Bridge Under Traffic Flow
The problem of reliability of a single-span spatial suspension bridge under random highway traffic is considered. The displacements of the bridge are described by coupled, non-linear,...
Research on Structural System Reliability of Cable-Stayed P.C. Railway Bridge Across Hong-Shui River
This paper analyses the structural system reliability of cable-stayed bridge by using the modified all failure modes. The concept of the structural subsystem is used to help the selection...
Vibration Tests and Damage Detection of P/C Bridges
A three-span countryside P/C bridge has been found to have excessive deflections in two of the three spans. It is reported that the prestresses in tendons of two girders of different spans...
A Reliability Analysis of Aerospace Structures Subject to Thermal Mechanical and Flight Loads
Aerospace structures are subjected to various flight loads throughout their service life. In certain anticipated missions, significant thermal stresses will be generated through atmospheric...
Unlocking Arena Gridlock
The Charlotte Coliseum features a $22 million reversible lane system, which provides easier access to and from 8,000 parking spaces. To improve access to the arena, a 3.6 mi road extension...
HELP is on The Way
Hill and Davies describe current progress on the development of a Heavy Vehicle Electronic License Plate (HELP) system in the United States. The HELP system concept combines automatic...
Pilot Bore Pays Off
The primary purpose of tunneling through Cumberland Mountain is to ease the 18,000 vehicle per day traffic through the rugged terrain that was a major transportation route when Daniel...
The NOVA SPAN Bridge System
The NOVA SPAN Bridge concept provides the basis for the design and construction of a new variant in the field of bridges and culverts which, in its performance and operation, incorporates...
Innovative New Drainage Pipe
Hydraulic tests on corrugated HDPE pipe with a smooth liner show that its Mannings n-value is in the range of 0.009 to 0.015 depending on the smoothness of the liners. With the smooth...
Review of PIM (Pipeline Insertion Method) Technology
The U.S. Army Construction Engineering Research Laboratory (USACERL) conducted the first demonstration of PIM (Pipeline Insertion Method, formerly Pipe Insertion Machine) technology for...
Stress Relaxation Characteristics of the HDPE Pipe-Soil System
All piping materials and soils are subject to viscoelastic behavior such as stress relaxation and creep. The combination of soil and pipe viscoelastic properties determine the time-dependent...
Return to search