Qualitative Formulation of Load Paths Through a Functional Description of Structures
The past few decades have seen major advances in computer tools to analyze complex structures and loadings. For the most part, these programs have focused on two areas - A, programs for...
Accurate and Efficient Element for Analysis of Concrete Structures
Reinforcement details in concrete structures are inherently complex. Therefore, the treatment of reinforcements is one of the most influential factors in the accuracy and efficiency of...
Crack and Contact Problems in Masonry Arch Bridges
A two-dimensional finite element program has been developed to predict the load carrying capacity of masonry arch bridges with different structural defects such as missing bricks and tangential...
Stress Analysis in Concrete with Cooling Pipes
A substructure method of finite element analysis is adopted in this paper to simulate heat transfer and thermal stresses in a concrete dam. The massive concrete structure is cooled by...
Study of a Computer System for Evaluation of Bearing Wall Stresses in Structural Planning ? Reasoning by Neural Network
This report proposes a reasoning system for bearing shear wall stresses in the ultimate state by using geometrical data of buildings and shear walls at the initial stage of aseismic structural...
Analysis of Sequential Route Choice Under ATIS
An experiment to collect sequential route choice data under the influence of an Advanced Traveller Information System (ATIS) was performed using a PC-based interactive simulation. The...
Landfill Groundwater Monitoring Data Administration
The U.S. Environmental Protection Agency (USEPA) has promulgated regulations that require the monitoring of groundwater samples at landfill sites. The analytical data resulting from sample...
Computer Aided Analysis/Design of Overlays in Cracked Road Pavements
In this contribution CAPA, a user-friendly, PC based, finite element system, capable of analyzing and dimensioning pavement overlays is presented. Because of the generality of the finite...
Three-Dimensional Nonlinear Analysis of a Wooden Structure with Base Subsidence
A heavy rain caused a famous Chinese ancient wooden structure to suffer serious base subsidence. In order to deal with the base subsidence of the valuable structure, a joggle model and...
Numerical Analysis of Membrane Action in Hollow Core Floors
The emphasis of the investigation is on the diaphragm action of precast floor structures. In order to improve existing manual calculation methods a parameter study has been carried out...
Plastic Limit Analysis of Arch Dams
This paper applies the lower- and the Upper- bound theorems of the plasticity theory to arch dams, according to different forms of discretization for dam, two methods, namely the structural...
Non-linear Analysis of a Cable Stayed Bridge
A concrete single-pylon cable-stayed bridge has been analyzed to investigate the ultimate capacity. Two different methods were used to investigate the nonlinear behaviour. First, a simplified...
Construction and Maintenance Decisions for Multi-Unit Deteriorating Facilities
Facilities that deteriorate over time and use can require maintenance or replacement. Selecting among replacement and maintenance alternatives for large systems of deteriorating facilities...
Intelligent Optimal CAD (IOCAD) for Arch Dams
The artificial intelligence, optimization methods and CAD techniques are mixed to develop an integrated system for design of arch dams. It includes a knowledge base, a data base, a stress...
Masonry Cladding, an Expert System for Distress Diagnosis
An expert system for masonry cladding failure diagnosis was developed. The system provides a heuristic procedure for diagnosing the most probable causes of cladding distresses and failure...
CAD System for Structural Aesthetics of Bridge Form
An exploratory design process for aesthetic bridge structure is proposed in this paper through developing a prototype of comprehensive CAD system. This process is conceived not only for...
On the Usage of AutoCAD as a User-Interface for a Finite-Element-Program
This paper describes the approach used by the author to take AutoCAD as a user-interface for an existing Finite-Element-package. Some principles concerning database management are discussed,...
Optimal Seismic Design of Structures
Structural design...
Computer-Aided Guyed Tower Analysis for the Rehabilitation of TTI Tower, Baltimore
A large guyed television tower owned by Television Tower Inc. of Baltimore is currently being analyzed in order to evaluate the capacity of the tower to support additional broadcasting...
A Study on Aseismic Behaviours of Composite Trussed Arch Bridge
Composite trussed arch bridge is a new type bridge structure developed in China recently, It has the following features: good integrality, reasonable inner force distribution, great spanning...
Return to search