ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Lifeline Systems Reliability, Serviceability and Reconstruction
In this paper we present a brief outline of methods and results for characterizing the reliability and serviceability of oil pipeline systems. Further, we present an outline of methods...

A Stochastic Clustering Model for the Occurrence of Large Earthquakes Along the Central Peruvian Margin
A stochastic model of a process of cluster centers and subsidiary cluster member processes is presented for the occurrence of large earthquakes along the Central Peruvian Margin. In the...

Earthquake Clustering in the Kanto District
Earthquakes in the Kanto district (Japan) between January 1983 and March 1987 are analysed for the identification of independent main shocks and for the hierarchical clustering of secondary...

Earthquake Ground Motions Consistent with Probabilistic Seismic Hazard Analysis
The present study deals with the new methodology for simulation of earthquake ground motion for the probabilistic risk assessment (PRA) of structures. Peak ground acceleration, acceleration...

Seismic Risk Analysis Based on Spectral Characteristics of Ground Motions
This paper presents two different approaches to construct the seismic response spectrum from a probabilistic point of view. One is the uniform hazard response spectrum, the other is the...

A Seismic PRA Procedure in Japan and its Application to a Building Perforance Safety Estimation: Part 1. Seismic Hazard Analysis
A method for seismic hazard evaluation which deals with response spectrum information is presented. A local city near Tokyo facing the Pacific Ocean is selected for the case study. It...

A Seismic PRA Procedure in Japan and its Application to a Building Performance Safety Estimation: Part 2. Fragility Analysis
In this paper, a practical seismic fragility evaluation method for structure and equipment systems is proposed. Structural and equipment failures are considered here, reflecting detailed...

A Seismic PRA Procedure in Japan and its Application to a Building Performance Safety Estimation: Part 3. Estimation of Building and Equipment Performance Safety
This paper presents an application of a seismic PRA procedure to an apartment building, which also contains an electric substation for the surrounding area. In this procedure, as presented...

Seismic Vulnerability Data and Optimum Allocation of Resources for Risk Reduction
The problem of reducing the seismic risk of existing buildings is tackled, and the most convenient strategies to be followed in planning upgrading interventions are discussed. After summarizing...

Reliability-Based Design Requirements for Foundations of Buildings Subjected to Earthquake
Optimum seismic design coefficients and safety factors with respect to shear and overturning failure modes are obtained for a set of multi-story frame buildings idealized as single-mass...

The Application of Reliability Based Design for Earthquake Resistant Communications Structures
Current earthquake design criteria consists of applying equivalent lateral static forces embodied in design codes. The structures designed in conformance with such provisions and principles...

Reconciliation Between Probabilistic and Deterministic Seismic Margin Analysis Methods
This paper presents a procedure for reconciling the results from the probabilistic and deterministic methods for calculating a high confidence of a low probability of failure (HCLPF) capacity...

Design of Buildings Under Earthquake Loadings Using Three-Stage Friction-Grip Elements
A simple method is given for the design of earthquake resistant buildings using three-stage friction-grip elements. Predesign is done by static analysis and verification is performed by...

Safety Improvement of Earthquake Loaded Structures Application of Semi-Active Control in Multi-Storey Buildings
This paper presents the studies for development of a new concept of aseismic design of structures. Basis of that engineering will be a structural optimization including elastic supported...

Aseismic Reliability of a Strengthened R.C. Single Story Industrial Building
Based on results of seismic hazard analysis for a considered site, seismic reliability of a strengthened RC single-story industrial building against collapse has been evaluated. Inelastic...

Safety Assessment Methodology for Construction Operations
There are many factors that affect the safety of construction operations which might lead to failures and accidents. The factors are associated with random, human-based or system uncertainty....

Assessment of Safety of Existing Buildings Using Fuzzy Set Theory
In this paper, an approach to estimate structural safety which may serve as a bridge between the theoretical and empirical approaches is explored. The new method combines subjective judgment...

Risk Assessment of Utility Network Systems Using Expert Opinions
This paper describes the application of an expert opinion and survey approach to the problem identification and risk assessment of engineering systems. The method of expert opinion for...

Structural Error Identification for Control of Construction Accuracy
In cases of large-scaled structures it is very important to keep the criteria of construction accuracy and therefore to correct construction errors if any considerable errors are found...

Envelope Crossing Rate and First Passage Probability
Various definitions of the envelope of a random response process are discussed. The statistical properties of the random envelope process based on these definitions are then derived and...

 

 

 

 

Return to search