Stress Analysis of the Liner and Liner Anchorage System Near Penetrations in a Reinforced Concrete Reactor Containment
An overpressurization experiment was conducted on a scale-model of a reinforced concrete containment building. The test was terminated when tears formed in the steel liner. Virtually all...
Development of a Test Validated Methodology for Predicting Concrete Containment Leakage
In the past several years, considerable research effort has been devoted by the Electric Power Research Institute and the U.S. Nuclear Regulatory Commission to the behavior of reactor...
Aerodynamic Methods for Mitigating Wind-Induced Building Motions
Excessive wind-induced motions of tall buildings most frequently result from vortex shedding induced across-wind oscillations. This form of excitation is most pronounced for relatively...
Tuned Liquid Damper and Its Application to Tower-Like Structures
A new kind of damper, Tuned Liquid Damper (TLD) relying upon motion of, shallow liquid in a rigid container for absorbing and dissipating the vibrations energy is explained. The performance...
Wind Performance of Asphalt Roofing Shingles
Pre-seal and post-seal wind resistance of asphalt roofing shingles is discussed. A test method for evaluating pre-seal wind damage is described. Wind tunnel testing results are presented...
Ballasted Single Ply Design Guide Development
A new roofing concept called ballasted single ply has now captured about 25% of the new and retrofit flat roof market. This concept relies on the use of ballast to provide the wind resistance...
Field Observation of Aerodynamic Responses of a PC Cable-Stayed Bridge During Its Erection
Recordings were made of the response of a PC cable-stayed bridge during erection and the wind velocity at erection site. These recordings were analyzed to provide estimates of the characteristics...
Wind Resistant Design Manual for Highway Bridges
The new wind resistant design manual for highway bridges has been required recently in Japan. The working group was organized in the Japan Road Association is 1984 to prepare the manual....
Status of Structural Engineering Research
Problems and opportunities for structural engineering research are being addressed in a study by the ASCE Structural Division Task Committee on Structural Engineering Research Needs/Funding....
The Civil Engineering Foundation ? A New Beginning
The United States' construction industry is ailing, experiencing a decline that rivals that of the auto and other US manufacturing industries. How the decline is to be halted...
Study and Design of Multi-Span Continuous Bridge
Multi-span continuous bridges which have been constructed in the Metropolitan Expressway Public Corporation are briefly explained. Some studies were carried out into their behavior. The...
Load and Resistance Factor Design for Engineered Wood Construction
The wood industry has provided sponsorship for the development of a reliability-based, load and resistance factor design specification for engineered wood structures. This user-tested,...
Load Combinations for LRFD With Wood Construction
Probability based limit states design for wood construction is complicated by the fact that wood is a natural material with large variations in mechanical properties and is sensitive to...
LRFD for Engineered Wood Construction: Calibration to Current Design
The structural design code for engineered wood construction is evolving to a limit state design basis in which the safety checks are derived from the underlying probability distributions...
Member Design Equations for a LRFD Wood Specification
A key step in the preparation of a load and resistance factor design (LRFD) based design specification for engineered wood construction is the selection of the behavioral equations for...
LRFD: Progress for Engineers and the Wood Industry
The LRFD for Wood project represents a milestone for the industry. The significance of the project goes far beyond merely switching formats in design equations. The project signifies both...
Safety Evaluation and Verification by Field Testing of Concrete Bridges
This paper describes a method of safety evaluation of concrete bridges in service and the verification of the evaluated results by field tests. The field tests to evaluate structural safety...
Current Bridge Research at Iowa State University
For the past 20 years the majority of the structural engineering faculty in the Department of Civil and Construction Engineering at Iowa State University (ISU) have performed research...
Some Design Considerations During Construction
Certain construction failures are discussed with associated design conditions leading to these failures. Some points of interest for engineers involved with construction equipment designs...
Impact of Errors on Safety During Construction
The construction process involves a number of procedures which integrate together from the first intention of building the project to the end of the structural cycle. In this study, a...
Return to search