LRFD: Progress for Engineers and the Wood Industry
The LRFD for Wood project represents a milestone for the industry. The significance of the project goes far beyond merely switching formats in design equations. The project signifies both...
Safety Evaluation and Verification by Field Testing of Concrete Bridges
This paper describes a method of safety evaluation of concrete bridges in service and the verification of the evaluated results by field tests. The field tests to evaluate structural safety...
Reliability Models for Bridge Structures
The development of rational design criteria requires efficient measures of structural performance. Traditional methods of analysis do not reveal the actual safety reserve (degree of redundancy)....
Seismic Design of Cable-Stayed Bridges: Evaluation and Research Needs
Earthquake-response characteristics of cable-stayed bridge are evaluated. 2-D and 3-D models are considered. The cases of multiple-support and uniform excitations are considered; furthermore,...
Some Design Considerations During Construction
Certain construction failures are discussed with associated design conditions leading to these failures. Some points of interest for engineers involved with construction equipment designs...
Impact of Errors on Safety During Construction
The construction process involves a number of procedures which integrate together from the first intention of building the project to the end of the structural cycle. In this study, a...
Performance of Steel Sheet Pile Cellular Cofferdams
Steel sheet pile cells are often used as construction cofferdams for structures to be constructed in rivers. Examples of this type of construction include locks and dams, pumping stations,...
Heath Building?Load Paths of an Underpinning
A case study of an underpinning is presented which, in principle, consists of the introduction of a transfer system in an existing building. The transfer system modifies the load paths...
Codified Reliability for Structures During Construction
It is generally acknowledged that the most critical stage of a structure's lifetime is that of construction, leading to failures or locking in forces and deformations that...
Standards for Design Loads During Construction: An ASCE Effort
ASCE embarked on a new standards activity by the Design Loads for Structures During Construction Standards Committee. The objective of the effort is the development of standard guidelines...
Instrumentation of the Shenyang T.V. Tower
The recently-completed Shenyang radio and television tower provides a unique opportunity to obtain comprehensive measurements of the along-span variation and coherence of wind-induced...
The Measurement of Structural Deflections
A basic parameter to be determined when assessing the performance of structures is the stiffness. This involves the measurement of static and/or dynamic deflections at representative locations...
Analysis of Glulam Lattice Dome
Glued-laminated timber (glulam) domes have become competitive in the engineering of large-span roof structures. Three-way glulam grid domes, such as the Triax and Varax domes, are particularly...
On the Analysis of Viscoelastic Plane Frames
Since its foundation on 1986 the Computational Mechanics Laboratory at the Polytechnic School of Sao Paulo has often been asked for non-linear stability analysis of wood and concrete structures....
Discrete Field Stability Analysis of Latticed Towers
The design of latticed towers is often controlled by the stability of the overall system as opposed to local member buckling. The purpose of this paper is to develop an elastic stability...
Why Bifurcation: A Study of a Reticulated Dome
Numerical results for a hexagonal lattice dome subjected to uniform gravity loading are presented. We demonstrate that a perfect nonlinear bifurcation analysis plays a crucial role in...
Development of Skewed Element for the Concrete Pavements
In the recent years, highway engineers introduced skewed joints in the concrete pavement with a 4 foot to 5 foot skew on a 24 foot width pavement, which results in only one wheel crossing...
An Overview of the U.S. Coordinated Program for Masonry Building Research
The U.S. Coordinated Program for Masonry Building Research is a time-phased set of specific research tasks addressing materials, component and system behavior. The objective of the program...
In-Plane Behavior of Concrete Masonry Coupled Walls
To study the in-plane seismic resistance of multi-story masonry coupled walls, 6 full-scale reinforced masonry specimens, each two stories high, are being constructed and tested in the...
Use of Experimental Data to Develop Probable Behavior
The intent of this paper is to present results of research that studies the performance of the University of Colorado walls tested by Professor Benson Shing. These walls would be classified...
Return to search