Optimum Cut-Outs on Plate Stability
Cut-outs are unavoidable in some of the plate components. To minimize the plate weight, in the meantime, to maintain the critical buckling load as high as possible is one of the major...
Lateral Impedance of Contact Pile Foundations
The static and dynamic lateral impedance of pile foundations for which there is continuous contact between the bottom of the pilecap and the underlying soil is investigated. A parametric...
Risk Assessment for Cladding Panels: An Expert Systems Approach
Risk assessment for structures in the context of wind engineering involves many factors such as wind hazard, the wind sensitivity of the structure and the socio-economic value of the structure....
The Risk of Progressive Collapse of Single-Story Buildings in Severe Storms
The probability of severe damage and progressive collapse of single-story commercial, institutional and residential buildings is examined. Observations of actual damage and the results...
Assessment & Control of Wind Created Risk During Construction
Structures under construction have been damaged by winds. The damaging winds, typically, are much lower than the design wind loads for completed structures. Little guidance is available...
Full-Scale On-Site Wind Induced Data From a Tall Building
Under the sponsorship of the National Science Foundation (NSF), a large amount of data accumulated in a study of the behavior of a tall building under the influence of winds will be made...
Prediction and Measurement of Wind Response: Case Story of a Wind Sensitive Building
The wind-induced horizontal accelerations of a 43 story office tower in New York City were monitored during 11 occasions over a period of about six months. The building dates back to the...
Wind Forces Measured on a Tall R.C. Chimney
This paper describes some aspects of an analysis performed on measurements of a variety of parameters relating to the wind, wind forces on and the response of a tall chimney. The results...
Moment Rotation Curves for Double Framing Angles
Moment-rotation curves for bolted framed steel connections are derived from force-deflection data obtained from laboratory tension and compression tests of angle segments. These derived...
Comparison of the Third and Fourth Edition of the Guide: What is New and Different
The fourth edition of the 'Guide to Stability Design Criteria for Metal Structures' is a unique collection of ideas and information on stability problems. It...
Beam-Columns
The Fourth Edition of the SSRC Guide presents a state-of-the-art information on beam-columns for use by specification writers, researchers, and designers. The present paper is an extremely...
Circular Tubes and Shells 4th Edition of SSRC Guide
The 3rd edition of the Guide was the first to have a chapter devoted to Cylindrical Tubes and Shells. Chapter 14 in the 4th edition is a major revision of Chapter 10 in the previous edition....
Cumulative Damage of Structures
Structural response records may be analyzed to estimate relative motions of civil engineering structures. Several methods are available for the estimation of cumulative damage on the basis...
Fracture-Mechanics-Based Fatigue Life Estimate
Fatigue lives of tee-shaped weldments are estimated using fracture mechanics concepts and crack growth rate data. Fracture mechanics is used to develop an approximate expression for stress...
Axial Fatigue Model for Wire Rope Strand
A numerical fatigue model for cables and rope strand subjected to fluctuating axial tension has been developed. This model determines the maximum wire nominal and Hertz contact stresses,...
Substitute Wind Concept for Elastic Stability of Cooling Tower Shells
The influence of the nonaxisymmetric wind distribution on the stability behavior of cooling tower shells is examined. It is demonstrated, considering about 50 cooling tower shells, that...
Mechanical Properties of Model Ice Rubble
Experiments were conducted to measure the mechanical properties of bulk ice rubble. Tests were performed under isothermal and plane strain conditions. Fresh water ice blocks were used...
Case Studies of Displacement-Induced Fatigue
The potential for displacement-induced cracking is a result of the co-existence of two conditions: an abrupt change in stiffness and a periodic force opposing it. Case studies of retrofitted...
Geotechnical Practice for Waste Disposal '87
This volume contains 55 papers covering many aspects of geotechnical issues associated with waste disposal. The papers represent advances during the intervening decade since the first...
Environmental Engineering
The American Society of Civil Engineers annually sponsors a Specialty Conference on Environmental Engineering. The 1987 Conference was held in Orlando, Florida on July 7-9, 1987 with cooperation...
Return to search