Seismic Response and Vulnerability of Water Delivery Systems
The response and vulnerability of straight segmented buried pipelines subject to seismic wave propagation are investigated in this paper. Seismic damage to buried pipelines is briefly...
Pipeline Field Experiment at Parkfield, CA
A field experiment designed to investigate the performance of buried pipelines at a fault crossing has been constructed near Parkfield, CA. The site was chosen to capitalize on the predicted...
Response Analysis of Crude Oil Transmission Systems
A preliminary analysis of the seismic response of continuous steel pipelines is presented. The Crude Oil Transmission System in the New Madrid Mo. area is choosen as an example. Assumptions...
Risk Assessment of Utility Network Systems Using Expert Opinions
This paper describes the application of an expert opinion and survey approach to the problem identification and risk assessment of engineering systems. The method of expert opinion for...
Stochastic Propagation of Semi-Elliptical Surface Cracks
Random propagation of a semi-elliptical surface crack is investigated as a bivariate stochastic process. Under a few assumptions, a probability distribution of the surface crack propagation...
Secure Landfills: Reliability-Based Analysis and Design
A framework is outlined for reliability-based analysis and design of secure landfills. Reliability, R, is the estimated probability landfill leakage, Ql, is below an allowable limit, Qf;...
Advances in Pipeline Materials and Design in Europe and North America
This paper presents an overview of various developments in materials technology and design procedures in the Western Hemisphere over the last 20 years. Some projections for anticipated...
Earth Pressure Acting on Buried Flexible Pipes in Centrifuged Models
Distributions of both normal and tangential earth pressures acting on three flexible model pipes having different wall thicknesses were successfully measured in centrifuge model tests....
Recent Advances in Structural Rehabilitation Techniques for Underground Sewer Pipelines
A great challenge for the coming years, if not decades, will be the repair, renovation and renewal of the existing sewerage systems in the Federal Republic of Germany in the interest of...
Evaluating Thermal Pressure Changes in Liquid Packed Piping
Theoretical and practical issues involved with the phenomenon of thermally induced pressure change in closed piping systems are investigated. The mathematical derivation of the applicable...
Safety Assessment of Welded Pipelines Undergoing Large Ground Deformation
Spatial distribution and modelling of liquefaction induced permanent large ground deformation are presented. The permanent large ground displacement patterns required for the safety assessment...
Prestressed Concrete Pipe Field Test
Strain changes in the prestressing wires and deflections of a 2130-mm-diameter precast (embedded cylinder), prestressed concrete pipe were measured during earth backfilling operations....
Ambiguities and Inanations of Current Plastic Pipe Specifications
This paper discusses current specifications, including materials for plastic pipe as compared to other pipe specifications, including rigid pipe materials. It discusses the ambiguities...
Buried Structural Capacity of Insituform?
In July 1988, a test was conducted at Utah State University to determine the structural support that can be provided to a failing rigid pipe system through the use of the Insituform process....
Innovative New Drainage Pipe
Hydraulic tests on corrugated HDPE pipe with a smooth liner show that its Mannings n-value is in the range of 0.009 to 0.015 depending on the smoothness of the liners. With the smooth...
Short-Term Versus Long-Term Pipe Ring Stiffness in the Design of Buried Plastic Sewer Pipes
It is often discussed which pipe ring stiffness should be used when designing the long-term deflection of buried plastic sewer pipes; the short-term value or the long-term value? As the...
Advances in Trenchless Sewer System Reconstruction
The new developments and refinements in trenchless reconstruction technologies now permit total sewer system rebuilding of collectors, interceptors, manholes, service laterals, and force...
Review of PIM (Pipeline Insertion Method) Technology
The U.S. Army Construction Engineering Research Laboratory (USACERL) conducted the first demonstration of PIM (Pipeline Insertion Method, formerly Pipe Insertion Machine) technology for...
Investigation & Rehabilitation of Seattle's Tolt Pipeline
Seattle Water Department's Tolt Pipeline brings water 24 miles from storage in the Cascade Mountains into city and suburban distribution systems. Twenty-three miles of this...
Pipeline Leak Detection and Location
A real time pipeline leak detection and location system has been developed. This system consists of a numerical model for transient flow, two sets of pressure and flow measurement equipment,...
Return to search