Flexural and Shear Moduli of FRP Beams
The analysis and design of structures of pultruded fiber reinforced plastic (FRP), constant cross-section, commercially produced, beams is discussed in the context of a shear deformation...
Analytical Model for RC Panels Under Cyclic Load
There are several existing constitutive laws for cracked concrete and steel in RC developed in Okamura laboratory. These models have been developed and verified through reversed uniaxial...
Wind Tunnel Testing of the Karnali River Bridge
An extended wind tunnel testing program of the erection procedures and the stability of the completed one-tower cable-stayed Karnali River Bridge was conducted with the help of full bridge...
Aerodynamic Improvements for Plate-Girder Bridges
This paper describes the application of wind tunnel tests on plate-girder cable-stayed bridges to ensure that the cross-section will not be susceptible to wind-induced oscillations. Information...
Retrofitting Aerodynamic Performance of Bridges
This paper is a review of aerodynamic retrofit techniques for long-span bridges. The discussion includes a description of the aerodynamic problems of static divergence, flutter, buffeting,...
Wood Diaphragms: Performance Requirements and Analytical Modeling
Wood diaphragms represent the principal mechanisms for resisting lateral loads in many light-frame buildings. While recent research has provided several mathematical models for predicting...
Panel-Sheathed Shear Walls ? Past and Future
In order for a building to resist the lateral forces caused by wind or earthquake, it is necessary that the building include a lateral force resisting system. When the walls are designed...
Looking at the Past
The story of bridge building is related through a look at the bridges of the past, from earliest bridges of record to the latest cable-stayed successes. Progress in bridge development...
Weathering Steel Bridges ? State of the Art
State of the art dissertations on materials that have been in commercial use for over a century are not likely to illustrate major new and innovative breakthroughs. Instead, the state...
Current Research and Future Developments
A review of current research projects at the National Science Foundation on bridge engineering are reviewed and discussed with respect to immediate and future impacts. A look into the...
Study of Partially Prestressed Beams With Unbonded Post-Tensioning
Test on partially prestressed members with bonded Post-Tensioning started recently. Experimental information regarding partially prestressed members having unbonded post-tensioning is...
Equilibrium-Serviceability Design of Hyperstatic P. C. Beams
A practical flexural design procedure for continuous prestressed concrete girders based on simulataneously ensuring specified margins of safety against both limit states of section and...
Shear Strength of P.P.C. Beams
50 beams of partially prestressed concrete were tested and 82 data of the ultimate shear-strength were obtained. Based on these results, this paper studies the effects of the degree of...
Analysis of Slender Prestressed Concrete Columns
This paper briefly describes an analytical model developed to study slenderness effects in prestressed concrete columns and walls and predict the characteristics of such members over a...
Time Dependent Analysis of Partially Prestressed Composite Members
The object of the paper is to develop a computer based procedure for analysis of members made up of precast prestressed concrete sections with cast-in-place topping. The procedure accounts...
Guidelines for Application of FEM to RC Design
In this paper, the main contents of the guidelines for the application of FEM analysis to the design of reinforced concrete structures are presented. The guidelines were published by the...
Macroscopic Models for R/C Shear Walls
In this paper, the discussion is mainly focused on four macroscopic models, recently proposed by Japanese researchers, for predicting ultimate strength of reinforced concrete (R/C) shear...
Verification of Macroscopic Models or RC Walls by FEM
Several macroscopic models based on the limit analysis have been proposed for obtaining the ultimate strength of reinforced concrete shear walls in Japan. When using these models, it is...
Parametric Analyses of RC Shear Walls by FEM
In this paper, nonlinear behavior of reinforced concrete shear walls is studied by using the finite element analysis. We applied numerical analyses to a wide range of parameters, such...
LRFD for U. S. Bridge Design ? Validation Issues
During the 1987 meeting of the AASHTO Subcommittee on Bridges and Structures, recommendations from the National Cooperative Highway Research Program (NCHRP), Project 20-7/31, regarding...
Return to search