Management and Institutional Considerations in Selecting Appropriate Technologies in Water Supply and Sanitation
Rural water supply and sanitation systems in developing countries have had an unacceptably high rate of failure or reduced use. Development planners have not sufficiently considered the...

Education, Research and Training for Appropriate Technology
Much has been written about appropriate technology (AT) and how to accomplish it. This paper adds to that literature with specific ideas for education, training and research programs and...

Appropriate Technology in Hydraulic Engineering
Appropriate, and successful, technology transfer is contingent upon the simple dictum: technology transfer is context dependent and context specific. Optimum success in the transfer of...

Verification of a Numerical Model for Suspended Sediment Transport in San Francisco Bay
Two-dimensional vertically averaged hydrodynamic and sediment transport models were verified to field measurements from a 25-hour intensive survey in central San Francisco Bay. Excellent...

Issues and Challenges Facing the Effective Delivery of Scientific Visualization
The availability of economical hardware and software products for scientific visualization has stimulated implementation of scientific visualization within high performance computing environments....

Introduction, and Analysis of Survey?Preliminary Report of Task Committee on Recommendations for Standards in Hydraulics
To help formulate its recommendations for future standardization of tasks in hydraulic engineering, the Task Committee conducted a survey of practicing engineers. This survey indicated...

Existing U.S. Standards in Hydraulic Engineering
The Task Committee on Recommendations for Standards in Hydraulics confined itself to topics that are used in hydraulic computations or design. Thus numerous standards related to size,...

Foreign Hydraulic Standards and Guidelines
Standardization in Europe is propelled by the incentive to achieve harmonization of design, testing, inspection and certification methods for an internal market among eighteen European...

Preliminary Recommendations from the Task Committee on Standards in Hydraulics
The Task Committee on Standards in Hydraulics has been given the responsibility of recommending whether or not the American Society of Civil Engineers (ASCE) should formulate standards...

Environmental and Hydraulic Considerations in the Design of a Circulating Water Cooling System
Environmental considerations play an important part in the design of a condenser cooling system. A once-through system may require assessment of a combination of events to determine the...

Verification of a Three-Dimensional Numerical Hydrodynamic Model of the C&D Canal and Adjacent Estuaries
A 3D hydrodynamic model of the C&D Canal and adjacent estuaries was developed by using the WES-CH3D code. CH3D uses a simplified second order vertical turbulence model based on...

Set-Down in a Tidal Embayment
A mean water level in tidal bays and estuaries that is higher than the ocean mean water level (set-up) is a fairly common occurrence. Set-down of the mean water level can be shown to be...

Visualization of a 3D Model of Chesapeake Bay
A three-dimensional (3D) numerical hydrodynamic and water quality model (WQM) of the Chesapeake Bay and its major tributaries has been developed by the US Army Engineer Waterways Experiment...

Sediment Modeling of Dam Removal Alternatives, Elwha River, Washington
The new version of the U.S. Army Corps of Engineers (ACOE) 1-Dimensional sediment transport model, HEC-6 'Scour and Deposition in Rivers and Reservoirs', was...

Predicted Fluvial Response to Dam Removal in the Kalamazoo River Valley, Michigan
Research has been conducted by the Michigan Department of Natural Resources (MDNR) to predict the fluvial response to dam drawdown and determine the distribution of recent deposits along...

PC Versatility in Modern Hydraulic Laboratory Data Acquisition Systems
Recent and newly emerging developments in low cost (personal) computing have enabled engineers to implement sophisticated data collection and analysis techniques on computing platforms...

Data Acquisition Systems for IBM Compatible System
Portable data acquisition systems composed of IBM compatible PC/XT/AT computers and analog to digital conversion cards can be configured with relative ease. These systems have the flexibility...

Computerized Data Acquisition for an Undergraduate Hydraulics Laboratory
Basic hydraulics principles and the operation of certain hydraulic systems can be effectively demonstrated with the aid of relatively inexpensive data acquisition and analyses systems....

Chesapeake Bay Data Set for Three-Dimensional Hydrodynamic Model Verification
A comprehensive data set representing September 1983 conditions on the Chesapeake Bay has been assembled and is proposed as a possible data set for inclusion in the work of the ASCE Task...

3-D Hydrodynamic Model Verification Using ADCPS
A physically comprehensive, hydrodynamic model of the East River has been used for a continuous three year simulation. As part of the calibration process, detailed vertical profiles of...

 

 

 

 

Return to search