LRFD for Engineered Wood Construction: ASCE Pre-Standard, Wood Industry Initiative
The structural wood community in the United States is in the process of developing a reliability-based consensus Load and Resistance Factor Design (LRFD) standard for engineered wood construction....
Reliability Bases for Codes for Design of Reinforced Concrete Structures
The American Concrete Institute Standard 318, Building Code Requirements for Reinforced Concrete, has permitted the design of reinforced concrete structures in accordance with limit state...
Limit States Design in Masonry
This paper reviews some aspects of limit states design for masonry structures based primarily on experience with a new Canadian code. Steps in an advanced second order safety index analysis...
Reliability Analysis of Axially Compressive Members
In the steel structure design code (TJ17-74) in China, a single curve was adopted for designing axially compressive members and the reliability of the column analyzed previously was based...
Load Resistance Factor Design of Aluminum Structures
Load and Resistance Factor Design (LRFD) is a reliability-based approach to design with uncertainty. It involves the explicit consideration of limit states, multiple load and resistance...
Study on Reliability of Actual Steel Structure Using Measured Data
The measurement of uncertainties was taken on an actually constructed steel structure. The stress and strain of each part of the structure are calculated based on the conditions assumed...
Statistical Properties of Prestressed Concrete Beams in Shear
Monte Carlo simulations were performed on prestressed concrete rectangular and tee-section beams in shear produced by a single concentrated load at mid span. The truss analogy model was...
Reliability-Oriented Materials Design of Composite Materials
A basic formulation for evaluating safety index of unidirectional fiber reinforced laminate is presented. The proposed formulation is based on in-plane failure criteria of composite laminate...
Damage Assessment Based on Repairability Criterion
This paper discusses the assessment of damage of protective structures based on the repairability criterion. The variables of the repairability are the amount of repair, repair cost, repair...
Bridge Live Load Models
This paper describes the analysis of weigh-in-motion data and the conclusions drawn. Statistical distributions of the effects induced in typical bridges due to single vehicle events are...
Reliability-Based Bridge Life Assessment
Fatigue considerations have usually entered design codes as a secondary consideration and often under the guise of serviceability limits. Most engineers felt if the maximum stress ranges...
Effect of the Uncertainty About the Fatigue Limit on Highway Bridge Reliability
Current fatigue design specifications for welded steel highway bridges subjected to high traffic volumes require the design to be capable of resisting high-cycle, long life conditions...
Reliability Assessment and Reliability-Based Rating of Existing Road Bridges
A practical reliability model for the safety assessment and rating of existing R.C. bridges are developed by explicitly incorporating the degree of deterioration and damages based on available...
Design Method Satisfying Safety Requirements for Various Limit-States Based on Information Integration Method
This paper discusses the applicability of the information integration method to optimum design of structures and the advantages of the above optimum structural design method over other...
Verification of NESSUS Code on Space Propulsion Components
Application of probabilistic finite element method to the structural analysis of typical space propulsion components such as turbine blades and high pressure ducts is reported. The study...
Space Station Freedom Requirements for Structural Safety, Reliability and Verification
The Space Station Freedom (SSF) is a large, manned vehicle that will be designed to remain in Space for 30 years. The SSF Program has established extensive safety, reliability and verification...
Incremental Assembly Stage Concepts for Space Station Freedom: Structural Design and Verification
The design and development of the U.S./International Space Station Freedom poses extreme technical and management challenges to the NASA/industry team. A comprehensive system engineering...
Space Station Freedom Pressurized Module Meteoroid/Debris Protection
Protection of spacecraft from the effects of a meteoroid/debris particle impact can add significant weight to the required structure. This paper discusses the meteoroid and debris environments...
Pressure Vessels for Space Station Freedom
Space Station Freedom (SSF) will utilize more than 10 different types of pressure vessels for storage of oxygen, hydrogen, nitrogen and mixed gases at operating pressures ranging from...
Mode Truncation Effects on Flexible Space Structures
This paper deals with the problem of active vibration control of flexible space structures. The main difficulty associated with this problem is that the structure has infinite vibration...
Return to search