A Statistical Model for Predicting Fatigue Life of Graphite/Epoxy Laminates
A failure stiffness criterion and a residual stiffness degradation model are proposed from which the statistical distribution of the fatigue life of composite laminates is derived. Experiments...
Simulation with Ordered Discrete-Stochastic Samples
In order to account for the viscoplastic deformations, leading to the failure of structures, the nonlinear dynamic responses can be obtained with convenient spatially discretization schemes....
Stochastic Fem Analysis of Nonlinear Dynamic Problems
This paper deals with the stochastic finite element analysis of nonlinear structural dynamic problems, using Monte Carlo simulation techniques. The stochasticity of those problems arises...
Damage Accumulation Models for Bridges
In the study summarized in this paper the serviceability and ultimate limit states were reviewed for concrete and steel girder bridges. A model is proposed to evaluate strength and remaining...
Structure of the Expert FRAMEX System on Fracture Mechanics
The FRAMEX expert system gathers, through independent modules, knowledge analysis techniques to be used by an expert for developing a fracture problem diagnosis. The system includes three...
Applying the Time-Reliability Equation
This paper presents a methodology for rigorously including time-varying elements of reliability through the use of the time-reliability equation. An example reliability analysis which...
Quantifying Quality Improvement Programs
Structural codes are evolving to a limit state design basis in which the safety checks are derived from the underlying probability distributions of strength and loads. An example safety...
Fatigue Reliability of Ship Hull Girder
Based on estimates on uncertainties in wave loading and fatigue capacity the fatigue reliability of ship hull girder is calculated with respect to global vertical wave bending moment....
Rainflow Cycles in Nonstationary Gaussian Processes
This paper develops a methodology for calculating the probability distribution for rainflow cycles in a nonstationary Gaussian process. The up- and downcrossing rates are estimated for...
Reliability Study of Randomly Imperfect Beam-Columns
In this study, the effect of random initial geometric imperfections was treated as a set of equivalent random initial forces. This concept enables the direct employment of existing stochastic...
Markov Approximation to Fatigue Crack Propagation
The distribution of the time required by a crack to reach a specified length and the distribution of the crack size itself are determined. To this end, the fatigue crack propagation growth...
Building Code Requirements for Masonry Structures and Specifications for Masonry Structures
The proposed Building Code Requirements and Specifications for Masonry Structures presented in this book were developed by the Joint American Concrete Institute, American Society of Civil...
Foam Over Troubled Toxics
Foams are now being used to control noxious vapor emissions from hazardous waste landfills. Another use of foams is in control of vapors emitted by chemical spills and fires. This article...
Priority Integrated Pipe Evaluation
The selection of the most suitable pipe for a given site involves the consideration of many factors affecting pipe performance. The factors to consider in sewer pipe evaluation and selection...
Current Developments in Reinsulating/Waterproofing Underground Steam Mains in New York City
The objective of Con Edison's reinsulation project is to develop the materials and technology necessary to reinsulate those steam distribution mains having excessive thermal...
Corrosion Monitoring of Critical Service Pipelines
Corrosion, including microbiologically influenced corrosion (MIC), is receiving much attention as a significant piping material performance concern particularly for critical service pipelines...
Iowa's Experience with Various Types of Pipe in Natural Gas Service
The Utilities Division, Iowa Department of Commerce, is responsible for the rate, service, and safety regulation of utility companies in the State of Iowa. This paper will summarize a...
A Multilayered Model for Analysis of Composite Pipes
A multilayered model is developed to analyze the behavior of composite pipes, such as prestressed concrete pipe, to the combined effects of internal pressure and applied loads. The pipe...
An Investigation of Field Performance of Reinforced Plastic Mortar Pipes
Every year many new pipe materials appear on the market for various applications. One of the important factors the design engineer and the user should consider while evaluating new products...
The Use of Restrained Joint Ductile Iron Pipe
This paper addresses some of the problems we at U. S. Pipe have observed from restrained joint installations during the past several years and the solutions devised. The restrained joints...
Return to search