A Stochastic Seismological Model in Earthquake Engineering
Recent studies of source mechanisms and wave propagation models enable one to generate strong motions based on deterministic source and source-to-site characteristics. The normal mode...
Practical Implementation of Seismic Probabilistic Risk Assessment
Many techniques for seismic probabilistic risk assessment have been developed by university researchers over the last decade. This paper reports on a study being conducted to determine...
Applications of ARMA Models for Seismic Damage Prediction
As an alternative to current design practice which is based on peak measured ground motions and scaled records from different events, individual earthquake records are treated as samples...
Actual Versus Assumed Behaviour of Girder Bridges
It is generally believed that the discrepancies between calculated and actual responses of bridges can diminish, to the point of being nonexistent, with refinement in the method of analysis....
Design Wind Loads for Broadcasting Antennas from Short Time Records
Very useful would be procedures for the determination of the design wind load on the basis of short time records, of duration comparable with the preliminary and/or design phases, so that...
Applying the Time-Reliability Equation
This paper presents a methodology for rigorously including time-varying elements of reliability through the use of the time-reliability equation. An example reliability analysis which...
Bayesian Updating of Seismic Fragilities of Nuclear Power Plant Components
Seismic fragility is represented by a curve of the conditiional probability of failure as a function of the peak ground acceleration. Since there are many uncertainties in the model and...
Outcrossing Rates By Point Crossing Method
The point crossing method is applied to compute outcrossing rates for general safe domains, i.e., nonlinear load combinations problems. For stationary processes the method typically yields...
Field Testing of Selected Urban BMP's
This paper presents the results of field sampling of two urban BMP's (Best Management Practice), namely, a wet detention pond and a level spreader/vegetative buffer strip...
Drawing up Waterproof Curtains
Curtain wall damage has recently become the number one source of building owner complaints. Until wall systems are designed with backup water collection systems and other details, leakage...
Dilatometers Settle In
The benefits of the dilatometer test DMT are described. This geotechnical in situ testing tool was developed and patented by an Italian professor and engineer named Silvano Marchetti....
Corrosion Monitoring of Critical Service Pipelines
Corrosion, including microbiologically influenced corrosion (MIC), is receiving much attention as a significant piping material performance concern particularly for critical service pipelines...
Soil Parameters for Design of Buried Pipelines
This paper presents the table of recommended design parameters for soil, shows their physical significance, and compares the resulting stiffness and strength for the variety of soil and...
An Investigation of Field Performance of Reinforced Plastic Mortar Pipes
Every year many new pipe materials appear on the market for various applications. One of the important factors the design engineer and the user should consider while evaluating new products...
Inspection of Under Bridge Length Culverts
Culverts over 20 feet in span length are classified as bridges and are inspected under the National Bridge Inventory and Inspection Program. Those facilities under bridge length, less...
Thrust Restraint of Buried Ductile Iron Pipe
It is the intent of this paper to present current state of the art thrust restraint design, present a basis for calculating required lengths of restraint, and to offer some practical suggestions...
Seismic Counter-Measures for Buried Pipelines
This paper deals with the seismic counter-measures for mitigating hazards from earthquake damages to buried water and sewer pipelines. To achieve an overall program for the earthquake...
Soil Properties Evaluation from Centrifugal Models and Field Performance
The performance of geotechnical projects is dependent upon the appropriateness of the design theory to the boundary conditions, and the characterization of the soil properties used in...
Hydraulic Studies of Surface Drainage from Level Furrows
Field studies have been completed to quantify the surface drainage phenomenon from level furrows which were rapidly flooded and then drained from the inlet end of the furrow. The proportion...
Trickle Irrigation of Peppers in Eastern Canada
A field study was conducted in Southern Quebec to determine the response of bell pepper plants to four irrigation treatments combined with three nitrogen fertilizer rates. The amount of...
Return to search