Interactive Analysis and Design Program for Girder Bridges
An interactive microcomputer program for the analysis, design, and rating of girder bridges is presented. The program, GBRIDGE, is user-friendly, menu-driven, and developed in modular...
Dynamic Soil-Structure Interaction by the Boundary Element Method: A Comparison Study
A comparison study of three Boundary Element Method approaches is attempted on the basis of a typical three-dimensional, dynamic soil-structure interaction problem. The vertical transient...
Solving Finite Element Structural Dynamic Problems on Small Computers Using Semi-Explicit Methods
Numerical techniques based on the partial decomposition of a coefficient matrix, are developed for structural dynamic problems. Improved iterative techniques are discussed which could...
Response of Eccentrically Braced Tall Buildings
The inelastic dynamic response aspects of tall steel buildings with eccentric K-bracing and eccentric X-bracing systems are examined, when subjected to factored El-Centro and computer...
Predictions of Thermally Induced Stresses in Thin Walled Grain Storage Bins Under Declining Ambient Temperatures
A generalized constitutive equation for cohesionless sands based on elasto-plastic theories is applied to a grain bin system. The validity of the theory is established through the finite...
Measuring Dynamic Occupant Loads by Microcomputer
Present building codes regard live loads caused by human movement as deterministic; values are based upon experience and tests run in 1912, 1922, and 1932. An experimental project to statistically...
Interactive Computer Graphic Seismic Design of Frames
An interactive computer graphics approach for earthquake resistant design of two and three-dimensional steel frames is presented. Analysis and design are possible from code-related equivalent...
Integrated Design of Concrete Flat Plate Structures
An integrated structural design and drafting system for concrete flat plate floor systems is described. This system provides at a single computer workstation the tools necessary to layout...
How To Design Highway Retaining Walls?A Practical Application of CADD
The recent work developed at the University of Missouri-Rolla (UMR) including optimization algorithms and two computer programs, ODSEWS-2D-II and ODRESB-3D are discussed. Several numerical...
Analysis and Optimum Design of Nondeterministic Structures under Random Loads
The importance of analyzing and designing structural systems by using a reliability-based approach is emphasized, including system safety requirements with regard to both serviceability...
Animated Response of Dynamic Systems
Understanding how a simple structural system responds to a dynamically applied load is a difficult concept for most students to grasp. The fundamental mathematical theory of this behavior...
Nonlinear Analysis of RC Panels Under In-Plane Loading
A new concrete material model based on a modified Mohr-Coulomb criterion is proposed for the nonlinear analysis of reinforced concrete panels. Emphases are made on the softening behavior...
Lateral Pressure in a Stiff Clay
A series of consolidated undrained and drained triaxial tests and oedometer tests were performed on horizontal and vertical specimens taken from an overconsolidated cretaceous clay. An...
Shear Mobilization on Laterally Loaded Shafts
From the results of a pressure cell instrumented rigid shaft embedded in stiff clay and subjected to horizontal static loading the side shear mobilization rate, and its contribution to...
Seismic Acceleration Maps for Oregon
To evaluate the seismic hazard for the Corps dams in the Portland District, operating basis earthquakes (OBE) and maximum credible earthquakes (MCE) were established for seismic zones...
Seismic Resistance of an Elevated Water Tank?A Case Study
Current knowledge of earthquake risk and structural response has raised concern about the safety of elevated water storage tanks which were constructed several decades ago. This paper...
Attaching Steel Members to Reinforced Concrete Elements
A variety of structural systems have been devised to strengthen existing buildings for improved seismic resistance. Strengthening methods currently in use for reinforced concrete structures...
RC Structures Under Severe Loads?An Expert System Approach
The authors propose the application of expert systems to the post-test assessment of specific structural systems. In the study reported, an existing expert system shell was employed and...
U.S.-Japan Coordinated Program on Masonry Research
An overview of the U. S. -Japan Coordinated Program on Masonry Research is presented. The program consists of parallel efforts in Japan and the United States to develop design methods...
Pseudo-Dynamic Testing of Structural Components
The pseudo-dynamic testing procedure is a simultaneous simulation and control process in which inertia and damping properties are simulated and flexibility properties are acquired from...
Return to search