Design and Performance of a Siphon Penstock
Siphons can be a cost effective alternative to more traditional means of conveying water to hydroelectric turbines. The City of Ann Arbor, Michigan selected a siphon as the most cost effective...
Modeling the Effect of Weirs on Reservoir Releases
A computer model was developed to examine the influence of weirs on the rise of water levels and increases in velocities from reservoir releases. The model allows for investigation of...
Hydraulic Model to Improve Debris-Handling Capability of Waterford Unit 3 Intake Canal
A 1:30 scale model was used to test the effectiveness of various modifications to the Waterford Unit No. 3 intake canal. The objective of the study was to assist in the development of...
Low Head Hydropower Finite Element Analysis
Finite element analysis provides a means of predicting the flow conditions resulting from the operation of a proposed hydropower facility. The results of a finite element flow analysis...
Methods for Specification and Verification of Hydraulic Design in a Turnkey Construction Contract
The project site is at the Hannibal Locks and Dam at New Martinsville, West Virginia. The existing project, a Corps of Engineers' (Corps) facility built in the 60's...
Real Time Modeling to Meet Flow Requirements at a Fossil Steam Plant
A real time modeling system has been developed to schedule hydropower operations in order to comply with discharge permit requirements at a downstream fossil steam plant. The modeling...
The Animas-La Plata Project Cost Sharing Agreement
The United States Congress required a cost-sharing agreement between the project beneficiaries and the Federal government. Under this agreement of June 30, 1986, the project will be constructed...
Surge Flow?Automation of Surface Irrigation?At Last
The studies which led to the development of Surge Flow at Utah State University, began as an effort to automate surface irrigation systems. The first prototype models, were electric control...
Physical Model Verification of a Coastal Discharge
A 1:75 scale physical model of a thermal discharge into a rocky, semi-enclosed bay was verified against extensive field data. The model accurately reproduced the prototype temperature...
Lights Out at Caribou
The Caribou powerplant restoration is one of the projects to receive an Outstanding Civil Engineering Achievement Award of Merit. On February 24, 1984 a rock slide on the ridge above the...
Overview of the Guidelines for T/L Structure Loadings
This section introduces a reliability based design methodology that forms the framework for the loading guidelines. A Load and Resistance Factor Design (LRFD) format is presented for the...
Design of Steel Transmission Pole Structures
This document has been carefully prepared in an effort to provide an authoritative source of information about effective design and fabrication of steel transmission pole structures. The...
Flood Operation Studies of the Valdesia Reservoir System in the Dominican Republic
The Valdesia reservoir system, located on the Nizao River in the Dominican Republic, is designed to provide irrigation water to the Nizao project areas and hydroelectric energy to the...
ESOLIN: A Model to Optimize Water Resource Systems
ESOLIN is a simulation model designed to study and optimize the development and operation of large hydro resource schemes. It was developed as a tool for the development of large hydro...
Sedimentation Impacts on a Pumpback Storage Facility
Concern over future sedimentation impacts at a proposed pump storage hydroelectric facility at Lake Francis Case on the Missouri River led to use of a numerical model to analyze lake hydrodynamics....
The Application of Aerodynamic Model Tests to Wind Loading of Tall Buildings
The theory of the aerodynamic model test, in which the wind response of tall structures can be computed for a range of dynamic properties from a measurement of the external wind load,...
Simulation Algorithms for Offshore Structures
A rational procedure for characterization of water depths for a random sea state is developed, in context with linearized wave theory. The importance of using the expressions for 'intermediate...
Large Reinforced Concrete Active Reclaim Silos
The design and construction of large reinforced concrete shell silos used to provide economical short-term protected storage for coal and lignite in the active reclaim systems of power...
New Directions in the Application of Probabilistic Concepts in the Seismic Analysis of Nuclear Power Plants
During the last 8 years, probabilistic concepts have been used in the seismic analysis of nuclear power plants. Probabilistic risk assessment (PRA) has been the primary vehicle for performing...
Experiences in Pneumatic Wave Energy Conversion in Japan
Several prototype and model studies of pneumatic wave energy conversion systems are discussed. These include those of the floating platform KAIMEI, the fixed system at Sanze and the new...
Return to search