Objective Comparison of Fatigue Crack Growth Laws
This paper presents objective criteria for choosing between different fatigue crack growth laws to represent a material's fatigue behavior based on a data set containing multiple...
Fatigue Crack Closure Under Random Loading
The goals of the research are to determine fatigue crack growth rates for stationary random amplitude loadings with arbitrary mean stress. Fatigue crack closure theory is applied to justify...
An Investigation of Live Loads on Concrete Structures During Construction
Slab formwork live loads include the weight of equipment, construction material storage loads, and impact loads when placing the concrete. In this paper material and equipment loads are...
Probabilistic Approach to Stress Distributions for Orthotropic Wood Plates
Probabilistic approach to the stress distributions of an orthotropic wood plate is discussed. The stress distributions for the orthotropic elastic media are fully dependent of the material...
General European Principles of Codes Concerning Reliability
The requirements for reliability cover safety, serviceability and durability and consider different causes and types of failure. They may concern the occurrence of a failure or the duration...
Background Studies for the Determination of Strength Functions in Eurocode 3?Design Rules for Steel-Structures
At present common unified rules for the design of Civil engineering structures are being prepared on the initiative of the Commission of the European Communities. Eurcode 3, which gives...
Limit States Design in Masonry
This paper reviews some aspects of limit states design for masonry structures based primarily on experience with a new Canadian code. Steps in an advanced second order safety index analysis...
Reliability of Miter Gates
A new approach for the reliability calculation of miter gates is presented. The reliability and hazard functions are related to the surficial wear of miter gates on their horizontal sill....
Reliability Models of the Mohr Failure Criterion for Mass Concrete
Failure in biaxially stressed concrete is here modelled by the Mohr criterion. The reliability of a stress state is evaluated in terms of 2 load variables and 1 or 2 strength variables....
Reliability Synthesis of CFRP Laminated Plate
The paper presents a formulation of shift synthesis to improve the reliability of fiber reinforced plastic (FRP) laminated plates with uncertain elastic constants and lamina strength....
Load Resistance Factor Design of Aluminum Structures
Load and Resistance Factor Design (LRFD) is a reliability-based approach to design with uncertainty. It involves the explicit consideration of limit states, multiple load and resistance...
Reliability-Oriented Materials Design of Composite Materials
A basic formulation for evaluating safety index of unidirectional fiber reinforced laminate is presented. The proposed formulation is based on in-plane failure criteria of composite laminate...
The Effect of Repeated Inspections on the Reliability Degradation Due to Fatigue Crack Growth
The effect of repeated in-service inspections on the reliability degradation due to fatigue crack growth is investigated based upon a stochastic fracture mechanics. A method to evaluate...
Effect of the Uncertainty About the Fatigue Limit on Highway Bridge Reliability
Current fatigue design specifications for welded steel highway bridges subjected to high traffic volumes require the design to be capable of resisting high-cycle, long life conditions...
Probabilistic Analysis of Structures Composed of Path Dependent Materials
A procedure is outlined for calculating the time-evolving CDF's (cumulative probability distribution functions) of structural response variables for cases in which the structure's...
Reliability Assessment of Pressurized Fuselages with Multiple-Site Fatigue Cracks
Multiple-site damage could cause a catastrophic structural failure of aged aircraft. A reliability analysis is proposed for an assessment of the capability of visual inspection on multiple-site...
Advances in Pipeline Materials and Design in Europe and North America
This paper presents an overview of various developments in materials technology and design procedures in the Western Hemisphere over the last 20 years. Some projections for anticipated...
Ambiguities and Inanations of Current Plastic Pipe Specifications
This paper discusses current specifications, including materials for plastic pipe as compared to other pipe specifications, including rigid pipe materials. It discusses the ambiguities...
Innovative New Drainage Pipe
Hydraulic tests on corrugated HDPE pipe with a smooth liner show that its Mannings n-value is in the range of 0.009 to 0.015 depending on the smoothness of the liners. With the smooth...
Review of PIM (Pipeline Insertion Method) Technology
The U.S. Army Construction Engineering Research Laboratory (USACERL) conducted the first demonstration of PIM (Pipeline Insertion Method, formerly Pipe Insertion Machine) technology for...
Return to search