Hydraulic Geometry of Mississippi Hill Streams
Hydraulic geometry data based on field and office studies are presented for a series of streams in the Black Creek and Long Creek watersheds in the upland hills of Central and Northern...
Bank Erosion During the 1988-Flood in the Rumoi River
Observations of the bank erosion were performed in the Rumoi River after the flood in August, 1988. It was found from the detailed research that the pattern of the flood was an important...
Flow Separation Around a Solitary Dike: Eddy Viscosity and Mesh Considerations
The hydronamic model RMA-2V has been verified on a variety of global circulation studies. These studies rarely involved separated flow patterns around sudden expansions or contractions....
Longitudinal Channel Response Due to In-Stream Mining
This paper describes the analysis procedure developed for the Arizona Department of Transportation for the estimation of short-term longitudinal channel response due to in-stream mining....
Experimental Study on the Hydraulic Characteristic and Trapping Efficiency of a Vortex Tube Sediment Trap
In this paper, an expression of water extractor ratio of a vortex tube has been obtained according to the principle of energy conservation and transformation; based on the feature of sediment...
3-D Free Surface Flow Modeling by Efficient Finite Element Method
3-D free surface flows in highly irregular boundary configurations are among the most difficult natural phenomena to be simulated by mathematical modeling. Not only the problems of accuracy,...
Flow Transitions Around a Single Large Bed Element
A qualitative description of the characteristics of supercritical-to-subcritical flow transitions due to the presence of a single large bed element (LBE) in a laboratory flume is presented....
Numerical Accuracies in Steady Open Channel Flow
The authors have reviewed the accuracy of the individual terms and formulations of the conservation of energy equation as used within the constraints of steady open channel flow modelling....
Momentum and Kinetic Energy Coefficient Research?Ramp Flumes
In October 1984. Reclamation Hydraulic Branch staff members investigated the operation of the A-Canal ramp at Klamath Falls, Oregon. The ramp flume was completed in 1983 as a water measurement...
Critical Flow Through Bridge Piers
A physical model study was performed at California State University, Long Beach to investigate the location of critical depth within bridge piers in supercritical lined channels. This...
Hydraulic Modeling of Flow Control Gates
Flow control gates are subject to complex hydrodymanic loadings, which may in many cases only be predicted through investigation on a physical hydraulic model. Scaling of gate models,...
Three-Dimensional Modelling of Recirculation Behind a Groyne
Extensive investigation on the three-dimensional flow patterns behind a groyne have been carried out in a small-scale experiment. A three-dimensional hydrodynamic numerical model is verified...
Model Tests for Design of Vibration-Free Gates
Experimental results are presented of hydraulic forces acting on an underflow gate. Underflow gate is a socalled bluff body and a review of the mechanism of vibration caused by separation...
Spillway Gates for the El Naranjero Dam in Spain
In June 1986 Zwag Zschokke Wartmann Ltd received the order from Hidroelectrica Espanola S.A. in Madrid, Spain for the design and model testing of 5 radial gates on the 'El...
Instability of Water-Fluid Mud Interface
Erosion and entrainment of fluid mud are treated by means of shear flow analysis. The water-fluid mud system is considered as a layered system of two continua separated by a distinct interface...
Horizontal Density-Gradient Effects on Simulation of Flow and Transport in the Potomac Estuary
A two-dimensional, depth-integrated, hydrodynamic/transport model of the Potomac Estuary between Indian Head and Morgantown, Md., has been extended to include treatment of baroclinic forcing...
Slurry Removal From a 2-D Fluidized Region
A two-dimensional fluidization experiment is performed on fine sand with a 5.08 cm diameter source pipe with horizontally opposed orifices, 0.317 cm in diameter, spaced 5.08 cm. Slurry...
A Study on Estimation of Aquifer Parameters in Unsteady Seepage Flow
A method which automatically identifies aquifer parameters is proposed in this paper. The aim of this investigations is to estimate transmissivities and storage coefficients of unsteady...
3-D Cavity Flow Analysis by a New Fractional Step Method Based on the Finite Element Method
This paper describes a new finite element scheme for solving the time-dependent incompressible viscous fluid flow expressed in terms of the Navier-Stokes equations. The main feature of...
Long-Term Numerical Simulation of Three-Dimensional Hydrodynamics of Chesapeake Bay
A time-varying 3D numerical model of Chesapeake Bay has been developed to provide flow fields to a 3D water quality model of the bay. The water surface, 3D velocity field, salinity, and...
Return to search