What Controls the Ultimate Load of a Glulam Dome?
A glulam dome is analyzed with the finite element method to determine the governing failure mode and ultimate snow loads. The dome consists of a triangulated network of curved glulam beams,...
Timber Structures
This paper deals with three different curvilinear timber structures of moderate spans - 120 feet to 200 fee +/-. In each of the three cases cited, the roof deck and boundary members are...
An Application of Inverse Problem Techniques to Spatial Structures
The present paper attempts to give a definition of inverse problems for spatial structures, and to develop a design method to find the optimum configurations and shapes for such structures...
Structural Failure and Quality Assurance of Space Frames
Space frame has been developed rapidly in China and used to wide extent to cover various types of buildings. The large scale of application will unavoidably cause quality problems. Damages...
Prisms and Antiprisms
Prisms form a group of mathematical figures, that have found widespread application in many disciplines, but especially in architecture and in building structures. They have two identical...
Experimental Study on a Buckling Behavior of a Wooden Single-Layer Space Frame of Reticular Shell on a Hexagonal Plan: Influence due to the Bolted Joint Looseness with Axial and Bending Resistance
The authors have investigated about the structural behavior of a wooden single-layer space frame structure with the bolted joints. We have carried out a buckling tests of a wooden single-layer...
On some Problems of the Multicriteria Optimization of the Spatial Grid Structures
One can not think contemporary structure designed without consciously complying with optimization methods. Creative activity of engineers have to be optimal or semi-optimal. It is necessary...
Field Measurements of Tensile Forces on a Spherical Dome Sector Caused by Internal Load of a Granular Product in Storage
Using a number of existing equations developed application to silos, bins, and hoppers, the horizontal load resulting from the stored product can be calculated. In this paper, the physical...
Non-Linear Solution Methods for Shell and Spatial Structures
Non-linear solution methods are investigated for the analysis of shell and spatial structures based on limited memory quasi-Newton updates. Under the proposed implementation the preconditioned...
AWS versus AIJ Tubular K-Connection Design Rules
Among various existing design rules for circular tubular connections, the AWS rules are compared with the AIJ rules because of differences between the two. Subjects of discussion include...
The Behaviour and Design of Stressed-Arch (Strarch) Frames
The paper presents an overview of the stressed-arch structural system and the associated research program undertaken at the University of Sydney between 1988 and 1992. The objectives of...
Design of Half-Through or Pony Truss Bridges Using Square or Rectangular Hollow Structural Sections
The initial part of this paper will outline some of the research, testing, and investigation which has been done on half-through truss bridges. This research is primarily concerned with...
Research and Application of Various Joints of Space Grid Structures in China
This paper introduces the research work results and applications of various joints of space grid structures in China. It also gives out formulas for determining the loading capacity and...
Spherical Domes Subjected to Horizontal Earthquakes
The purpose of this paper is to get a powerful tool for response analysis of a spherical dome subjected to dynamic excitation based on mathematical analytic method, i.e., the Galerkin...
Dynamic Analysis of Unstable Structural Systems With Prescribed Velocities
Structural systems that have large inextentional deformation, or in other words, deformation without stain are called 'Unstable Structural Systems.' They include cable structures, membrane...
Response of Truss Structures Subjected to Dynamic Loads During Member Failure
The paper presents a method for and results from an investigation of the response of a truss structure during the chain reaction of its member failure while subjected to external static...
Dynamic Characteristics of Translational Lattice Domes
The feasibility of using lattice domes of various shapes generated by translating a variety of parametric polygons is illustrated and the dynamic characteristics of these lattices determined....
Damage Prediction in Reinforced Concrete Structures under Cyclic Loading
Assessment of the stiffness, resistance and damage behaviour of reinforced concrete members under high cyclic loading due to earthquake actions must consider material nonlinear effects...
Continuous Pulse Control of Structures with Material Nonlinearity
A control method is presented for reducing the dynamic response of structures in the inelastic material range using a control force from an active control system. The proposed method of...
Imperfections and Thin-Walled Bars Behaviour
Experimental and theoretical observations allowed us to present some new conclusions concerning the proper, and safe designing of the structures composed of thin-walled bars (TWB). These...
Return to search