ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Noncondensable Gas Composition and Outgassing Rates in the Open-Cycle OTEC System with Direct-Contact Condensation
This paper will present the results of recent measurements of noncondensable release from an open-cycle ocean thermal energy conversion (OC-OTEC) system in a direct-contact condensation...

Optimum Removal of Noncondensable Gases for Open Cycle OTEC System
For an open cycle OTEC system the dissolved gases in warm surface seawater are evolved in the flash evaporator. Those behave as noncondensable gases in the condenser and degrade the condensing...

De-Aeration and Re-Injection of Noncondensable Gases in Open-Cycle OTEC
Non-condensable gas exchange characteristics in seawater and fresh water are compared and contrasted. The higher rate of exchange observed for these gases in seawater is incorporated in...

Availability of Portland Cement
A general description of economic, technical, and environmental factors that affect the types of portland cement available is presented. Economic factors have had a major effect on balance...

Asphalt in the U.S. Transportation Infrastructure
Asphalt has been the major pavement material responsible for development of the transportation infrastructure enjoyed by American citizens. This paper addresses issues to be monitored...

The Future of Steel Structures
The future availability of steel as a construction material is covered in this paper. The advances in the material, design fabrication and erection are discussed. The quality and quantity...

Reliability Assessment of Wood Components
Considerable progress has been made in the nondestructive evaluation (NDE) of wood components since the introduction of the first concepts more than twenty-five years ago. New stress wave...

Evaluation of Bond Performance of Epoxy-Coated Reinforcing Steel Using Nonlinear Finite Element Analysis
The role played by epoxy coatings on the failure of standard beam-end specimens is explored. The specimen consists of a reinforcing bar embedded in concrete. As the bar is loaded, the...

A Materials Study of Interleaved Bismaleimide Composites
One approach for improving damage tolerance in epoxy based composites involves interleafing of tough adhesive layers between plies of the composite prior to fabrication. Extension of this...

Resin Transfer Process Modelling: Computational & Experimental
In most cases, the resin transfer molding (RTM) researcher has a fundamental understanding of composites and possibly some mold design experience. The areas of resin flow dynamics and...

Compressive Strength Relationship Between Cylinder Tests and Core Tests
A core obtained from any field cured structural member will be inherently different than the field cured cylinder used as a control. Consequently, comparisons with field cured cylinders...

Maturity and Pullout for High-Strength Concrete
As with other types of concrete mixtures, construction with high-strength concrete requires assurance that sufficient levels of in-place strength are reached at specific times. An experimental...

Effects of Physicochemical Factors on Asphalt Aging
A new model for asphalt oxidative aging is presented. The model proposes that the kinetics of low temperature aging in the pavement temperature range is largely governed by physicochemical...

Asphalt Age Hardening?Trends and Predictions
Pavement cracking is substantially related to the consistency of asphalt cement binders. The variation in hardness of binders is related primarily to asphalt characteristics, environment...

Asphalt Changes in Drum Dryer and Batch Operations
The study was designed to determine whether steam distillation of asphalt takes place in a drum dryer mixer by comparing changes induced by various laboratory conditioning (aging) techniques...

Combined Compression-Shear Experiments on Mortar-Aggregate Interfaces
Material interfaces between matrix and aggregate particles in cementitious composites such as concrete are considered to be a very important component of the material microstructure, which...

Waste Geotechnics and Geosynthetics
The geotechnology related to waste management focuses around assessing the movement of water and pollutant transport, containment of the pollutant so that it is unable to pollute the underground...

Applications of Wood Materials for Innovative Bridge Systems
This paper describes completed research and the status of research underway on timber bridges that are part of the USDA Forest Service timber bridge initiative. The initiative includes...

Rate Effects in the Deformation of Rocks
This paper gives a brief review of creep and rate effects on the behavior of rocks, within a wide range of confining pressures and temperatures, and with a special emphasis on the physical...

A Microplane Constitutive Model for Soils
A microplane model for the inelastic behavior of soils is presented. The microscopic constitutive equations are defined independentely for a set of microplanes covering all possible orientations,...

 

 

 

 

Return to search