Dynamic-Fatigue Response of Continuous Composite Bridges
The dynamic response of continuous composite bridges and the influence of fatigue loading at resonance frequency on the structural response are investigated. It is shown that cracking...
The Eurocodes and Shrinkage in Composite Beams
The two parts of this paper relate to different aspects of design procedures for composite structures of steel and concrete. First, recent developments in the coordination of the eight...
SRC Elevated Station Structures for New Bullet Trains
SRC Steelframe reinforced concrete structures were utilized on several station buildings for the Japanese National Railways bullet trains. This paper presents an outline of the dimensions...
Recent Developments in Mixed Steel-Concrete Systems
Mixed steel-concrete systems have emerged into a well established new system that can be used as readily as either steel or concrete systems for high-rise buildings. Mixed systems offer...
Strength of Biaxially Loaded SRC Columns
The paper presents the results of an experimental study on the elasto-plastic behavior of 'Steel reinforced concrete (SRC)' columns subjected to biaxially eccentric...
Beam-to-Column Connection of a Composite Structure
Composite structures can exhibit excellent performance against seismic force, and fire safety as well. However, the traditional steel reinforced concrete (SRC) system or concrete encased...
Beam to Column Stress Transfer in Composite Structures
To clarify the mechanism of the stress transfer from the steel beam to the composite column through the beam-column joint, eight exterior beam column assemblies were tested under reversed...
Design of Framed Steel Structures with Infill Reinforced Concrete Walls
It is a well-known fact that an infill shear wall in a frame acts as a compressive diagonal strut, giving strength and inflexibility to the frame. Recently the Architectural Institute...
Seismic Capacity Evaluation of SRC Buildings
The Japanese standard for seismic capacity evaluation of existing composite steel and reinforced concrete (SRC) buildings was introduced. As it developed, based on the previously established...
Composite and Mixed Construction in Czechoslovakia
Various composite and mixed systems have been used in Czechoslovakia. Special attention is focused on design methods, effective construction, and material savings. Current developments...
Seismic Strengthening of Existing RC Buildings
Seismic strengthening of existing reinforced concrete (RC) frame buildings by the use of steel braces or panels was studied experimentally. A special joint between steel elements and the...
Timber Bridge Decks
The portion of the nation's 500,000 bridge decks that are made of timber has been declining for years, as the old timber ones on secondary road bridges are rebuilt, in most...
Checking Off CADD Priorities
Diving head on into new computer aided design and drafting (CADD) hardware and software without considering their effects on firm or university's operation is as bad as ignoring...
Critical Load Program
The elastic critical load of a structural frame is a fundamental parameter in assessing its stability. It is an upper bound to the failure load of the frame, in the same way that the Euler...
Computers in a Planning Context: Another Reality
Over the past twenty years water resources planning has seen a great increase in the development of computer methods of analysis. This has transformed the way the hydrology, hydraulics,...
Quantifying Social and Environmental Objectives
Over the past decade, there have been great improvements in economic and multiobjective techniques for quantifying social and environmental objectives in water resources planning. Nevertheless,...
Water Develoment Models for Contemporary Planning
A methodology for evaluating water planning alternatives was developed and applied to the Nebraska Platte River. The methodology involved a micro-computer based screening model and a multi-objective...
An Economic and Financial Planning Model
A comprehensive computer model for generation planning has been developed and applied to several large-scale power sector master plans. A unique feature of this model is the concurrent...
Analysis of Reservoir Operations on the IBM-PC
The optimization of reservoir operations is a major economic concern. This paper contributes a computer software package, SPORO, written for the IBM-PC, for the stochastic optimization...
Implementation of a Micro-CADD System
Computer-aided-design-and-drafting (CADD) systems utilize computer technology to aid the engineer in his work. CADD systems are designed to process graphics with speed and accuracy to...
Return to search