Recent Advances in Engineering Mechanics and Their Impact on Civil Engineering Practice
The emphasis of these proceedings is on contributions and advances in the areas of solid and fluid mechanics that advance civil engineering practice. The main topic considered are, computers...
Underground
The Civil and Mineral Engineering Building at the University of Minnesota in Minneapolis was designed with careful attention to the environment. In the years ahead, this building will...
EPCOT
EPCOT Center, perhaps the most elaborate and futuristic entertainment attraction in the world, is also a major achievement in such civil engineering-related disciplines as geotechnical,...
Restoration
After the San Fernando earthquake of 1971, California's State Capitol Building was declared an earthquake hazard and vacated. It took the most extensive structural and architectural...
Building Trends: The View from Houston
Highligts of the major changes in building design and construction over the past decade are presented from a structural engineer's viewpoint. The areas covered include: (1)...
Forensic Engineering: What Role for ASCE?
Responding to heightened concern within and without the American Society for Civil Engineers (ASCE) about failures of engineered structures and other works, ASCE formed two commitees to...
Steel Beats Concrete for Idaho Bridge
As an alternative to prestressed concrete design, the State of Idaho and the Federal Highway Administration encouraged the use of cable-stressed steel girder design for the Bonners Ferry...
Sewers: Repairing Beats Replacing
Rehabilitating decaying sewers can be up to 70% less costly than replacing them. Yet most sewerage agencies wait until a pipe collapses before taking action, necessitating expensive emergency...
Frontiers in Hydraulic Engineering
These proceedings include approximately 140 papers presented in the ASCE Hydraulics Division Specialty Conference, August 1983, Cambridge, Mass. The principal aim of the conference was...
Characterization of Offshore and Coastal Ice Conditions
Seasonal sea ice conditions typical of nearshore coastal zones are reviewed. Prominent ice features influencing design ice conditions for offshore structures are described. This paper...
Design of Prefabricated Offshore Structures for Ice Forces
The design of fixed offshore structures to resist forces from sea ice features is reviewed. The emphasis is on prefabricated structures constructed elsewhere, towed to location and installed,...
Design of Manmade Offshore Islands for Ice Forces
Approximately sixty percent of the undiscovered oil and fifty percent of the undiscovered gas probably lies in the sedimentary basins offshore Alaska (USGS 1980). Because of this hydrocarbon...
Design of Port and Coastal Structures for Ice Forces
Design of ice-affected port and coastal structures cannot be addressed in a few single specific terms, but must instead account for a matrix of elements differing at each site. Evaluation...
Design of Offshore Pipelines for Ice Environments
Design and installation of offshore pipelines in cold regions requires special care. Low ambient temperatures may cause increased friction losses in oil and gas lines due to wax crystallization...
Design of Bridges for Ice Forces
Sources of knowledge on ice forces and ice effects on bridges are listed and discussed briefly. Comments are made on experience of damage by ice and on the influence on bridge costs of...
Design of Navigational Structures for Ice Forces
An overview of ice conditions and the types of ice action that are hazardous to navigational structures is presented. Depending on the circumstances, ice failure against structures occurs...
Design of Submerged and Floating Structures
The objective of this paper is to present an overview of the state-of-the-art of ice engineering as applied to submerged and floating structures. Five specific design studies are reviewed,...
In Search of Ancient Engineers
Many examples of pre-Columbian civil works have been uncovered in North and South America. Some reflect well-organized technologies comparable to those of the Old World of the same time...
Structural Steel Details: Is Responsibility a Problem?
Because structural engineers are leaving design of structural steel connections to fabricators, the problem of responsibility for those details has arisen. This article explores a variety...
Pile Construction Practices in Arctic Regions: State-of-the-Art
Pile installation techniques in cold regions include drill and slurry, and driven methods for foundation designs. In the past, piles used for structural support in permafrost have consisted...
Return to search