Treating Expansive Soils
Damage that expansive soils do to light buildings can often be prevented or mitigated by preconstruction soil treatment. Treatments of three kinds are described�reworking the soil, controlling...

Tunnel Saved by Flyash
When inspection early in 1986 showed that Detroit's Northeast Raw Water Tunnel was near collapse at one location, quick action and a unique use of flyash-cement grout or fill...

Milan's Model Metro
A number of innovative geotechnical methods were used at the extension of the Milan, Italy, subway. Jet grouting, a technique used only a few times in the United States, was notable among...

New Deep Foundations Cut Costs
Two European innovations in deep foundations are highly competitive in cost, time and material. They are the barrette (slurry wall segment) and the bored pile/caisson which is then grouted...

Cyclic Energy Absorption by Reinforced Concrete
Results are presented on the basis of experiments conducted on conventional and steel fibrous reinforced concrete beams. The effects of the amount and nature of steel reinforcement and...

Stress-Strain Behavior of Grouted Hollow Unit Masonry
Experimental results from axial stress-strain tests including post-peak response on hollow unit masonry prisms are compared to those of previous researchers....

Rehabilitation of Gravity Wharf by Underpinning
The Municipal Wharf at the Port of Providence, Rhode Island, is currently under rehabilitation to accommodate modern trends in marine cargo handling and shipping. The three-phased project...

Overdredging at Existing Gravity Structure
Pacific Elevators Ltd. decided to upgrade Berth No. 2 to handle ships up to 70,000 DWT. The difficulty was to maintain the support of the cribs after dredging of the berth to minus 45...

Asphalt Pavement Modifiers
Modifiers or additives to asphalt concrete pavements are being researched or marketed by many major chemical firms. Modifiers or additives are used to stiffen the asphalt in hot weather...

Bugs and Carbon Make a PACT
At its Chambers Works in southern New Jersey, DuPont was ordered to sharply reduce the BOD load in the wastewater it discharged to the Delaware River. Out of this mandate came the PACT...

Subsurface Soil Monitoring via Acoustic Emission
Included in this paper is an overview of acoustic emission (AE) monitoring and a brief review of past applications. Focus is then placed on two in-situ geotechnical applications; preconsolidation...

In Situ Testing for Ground Modification Techniques
Presented are the status of three in situ testing techniques in relation to Ground Modification and a general overview of eight Ground Modification methods with case histories and appropriate...

Dilatometer Tests for the Design of Grouted Piles in Rock
A case study of drilled and grouted piles in rock, which were analyzed using results of down-hole dilatometer tests is presented. The tests were performed from a jack-up platform in water...

Design Parameters for Grouted Piles in Rock From In-Situ Load Tests
A series of pile load tests were performed at an onshore site to develop final geotechnical parameters for the Gaviota platform foundation which consists of large diameter drilled and...

CPT/DMT QC of Ground Modification at a Power Plant
The use of 908 static cone penetration test (CPT) and 33 Marchetti dilatometer test (DMT) soundings provided the quality control (QC) needed to improve a power plant site by the use of...

Implications of Soluble Microbial Products (SMP) Formation on Biofilm Reactor Performance
The objective of this study is to evaluate the implications of SMP formation for biofilm treatment. To do so, the extended steady-state model was applied to predict effluent concentrations...

The Optimization of Nitrification and Denitrification in Plug-Flow Activated Sludge Systems Treating Municipal Wastestreams
Most conventional plug-flow activated sludge plants experience nitrification, particularly during higher temperature conditions. Under these circumstances, additional power is required...

Recyclying of Dust from Electric Arc Funances�An Experimental Evaluation
Each year the electric arc steelmaking industry generates approximately 650,000 tons of dusts containing valuable metallic resources such as iron, zinc, lead, and chromium. EAF dust is...

Design Considerations and Experiences with VOC Treatment Technologies
This paper presents a review of design considerations and experiences with packed column aeration for removal of volatile organic chemicals (VOC) from groundwater at various locations...

Emission and Control of Volatile Organics in Hazardous Waste Landfills
Landfill simulation and modeling can provide a useful tool in the management of hazardous wastes to estimate the vapor phase emissions of pollutants so that a realistic assessment can...

 

 

 

 

Return to search