The Relationship of Benefits to System Size for Irrigation Projects
This paper presents a generalized linear programming (LP) and farm budget model for optimization of on-farm irrigation benefits resulting from variations in irrigation project size. The...
Crop-Water Production Functions and System Design
A Task Committee to evaluate application of crop-water production functions to irrigation system design and management was established by the ASCE Irrigation Water Requirements Committee...
Optimum Irrigation Under Saline Conditions
A dynamic production function for cotton is estimated. Optimal irrigation volumes, timing, and qualities are calculated using dynamic programming. Optimal water quantities are sensitive...
CWSI and Stomatal Resistance of Cotton and Soybeans
A new instrument, Scheduler(TRADEMARK), has been developed to measure the onset and duration of plant water stress. This device consists of a sensor package (containing an infrared thermometer,...
Satellite Remote Sensing for Regional Crop Inventories
LANDSAT 4 and 5 Satellite spectral images of the Columbia Basin were obtained during the 1984, 1985 and 1986 growing seasons by Cropix, Inc. of Hermiston, Oregon. A field classification...
Estimating Number and Duration of On-Times for Surge Irrigation
Research shows surge flow can achieve efficient and uniform irrigation on some soils. However, most available information focuses on computerized analysis and modeling for research purposes....
Spread Sheets for Irrigation and Drainage Projects
Land use planners as well as planners from other disciplines use overlays for site analysis but these are usually a qualitative display. Recently the advent of spread sheets coupled with...
California's Dam Safety Program?The Development of Hydrology for Dams (
California's water code provides for supervision of dams and reservoirs with regard to protection of life and property. This code is administered by the Department of Water...
General Design for Modifications to Existing Lower Santa Ana Drop Structures
A model study conducted at the Waterways Experiment Station investigated the possibility of utilizing the existing drop structures of the Santa Ana River. Initial tests on selected existing...
Forty Years of Computational Hydraulics?1960-2000
The definition of computational hydraulics as used herein is: the application of numerical methods for the solution of problems of hydraulic flows, largely as practiced by the civil engineering...
Redundancy Evaluation of Existing Bridges
The redundancy of an existing bridge can only be correctly assessed by considering the full superstructure as a single entity. Any formulation based on the analysis of bridge components...
Calibration of a Bridge Rating Formula for Overload Permits
This paper proposes a method to calibrate a reliability based load and resistance factor design (LRFD) permit evaluation formulation that will account for the overloaded truck's...
LFRD Bridge Design as Viewed by the Designer
The load and resistance factor design (LFRD) design concept has been resisted by some bridge engineers on the grounds that it represents a reduction of the 'factor of safety'...
Multiple Presence Reduction Factors for Bridges
This paper reviews the multiple presence reduction factors specified in the AASHTO and Ontario codes, and provides a method by which these factors can be established in relation to volume...
Overview of the Guidelines for T/L Structure Loadings
This section introduces a reliability based design methodology that forms the framework for the loading guidelines. A Load and Resistance Factor Design (LRFD) format is presented for the...
Three Automatically Erected Folding Spans
The U. S. Navy has identified three rapidly erected bridges. Each is capable of spanning 400 feet (120 m) with a 70 ton (63 tonne) live load at mid-span. Each will also fold into a 15...
Design of Steel Transmission Pole Structures
This document has been carefully prepared in an effort to provide an authoritative source of information about effective design and fabrication of steel transmission pole structures. The...
The Design of Stays for Cable Stayed Bridges
Much of the R & D work done in the development of details for the modernized form of stayed girder bridges has been contributed by those practicing in the field of prestressed...
Wind Buffeting of Cable-Stayed Bridges During Construction
Some of the dominant loadings on a cable-stayed bridge during construction are a result of the non-uniform vertical and horizontal gust forces on the deck and the associated dynamic response...
Innovative Approaches to Bridge Pier Foundation Design
As a part of a Value Engineering change proposal the pier foundations for the US-31 bridge over the St. Joseph River and floodplain near Niles, Michigan were re-designed. The varying soil...
Return to search