Settlement Characteristics from Insitu Tests in Flyash Structural Fills
Flyash from the Baltimore Gas and Electric Company's plants was used to construct structural fills in thickness ranging from 5 to 25 feet (1.5m to 7.6m). Several warehouses...
Fact or Friction: A Review of Soil Response to a Laterally Moving Pile
A review of soil response around a laterally moving pile is presented and 'Winkler' spring soil modulus variations are discussed. Based on available theory, and...
Bearing Capacity of Shallow Foundation on Granular Column in Weak Clay
Laboratory model tests results for the ultimate bearing capacity of shallow rectangular foundations supported by granular columns made in weak clay have been presented. In all cases, the...
Long Term Performance of High Rise Mat Foundation
The vertical movement of the foundation soils for a multi-story high rise office tower was monitored during foundation excavation, tower construction and the 25-year in-service period...
Resilient Moduli of Soils
Laboratory Conditions
Historically, structural pavement design has been based on static testing techniques, such as the CBR. More recently, the profession has placed increased emphasis on repeated load testing...
Settlement of Residual Soils
The method previously suggested by the author in 1977 for calculating settlement of non-plastic to slightly plastic Piedmont Physiographic Region residual soils is reviewed. Additional...
Selected Papers from the Chinese Journal of Geotechnical Engineering ?1985
This book contains English translations of 19 articles selected from the Chinese
F.E.M. Analysis of Mobile Arctic Caisson Island With Stochastic Material Properties
The paper examines how soil uncertainty influences the short term settlements and stresses of the Mobile Arctic Caisson on the original sea bed. Utilizing a two-dimensional plane strain...
In Situ Tests Aid Design of a Cylinder Pile Wall
In situ testing was used to verify geotechnical design parameters and modify construction for a 22 million dollar slope stabilization project near a major highway interchange. The project...
Correlation of Soil Parameters From In Situ and Laboratory Tests for Building 333
Pressuremeter, plate bearing and cone penetration tests were performed on the prepared foundation soil for Building 333 located in the Red River Army Depot near Texarkana, TX. The results...
Dilatometer Tests in Sand
The paper presents two applications of the dilatometer test in sands: control of compaction and determination of constrained modulus. Twelve dilatometer tests were carried out before and...
A Relationship Between Deformation Modulus and SPT N for Gravels
The results of over 200 horizontal plate load tests performed in situ in large diameter boreholes on gravels at various relative densities are used to develop a relationship between deformation...
In Situ Tests for Foundation Vibrations
There are several well established methods of determining shear modulus in situ and these are summarized in this paper. New techniques are being developed for in situ determination of...
Dilatometer to Compute Foundation Settlement
Sixteen examples demonstrate how the S. Marchetti dilatometer test (DMT) provides soil compressibility data for the rapid calculation of foundation settlements with an average ratio of...
Research on Transportation Facilities in Cold Regions
Transportation facilities research in cold regions, reported in this session proceedings, begins with a field study showing that ground surface characteristics have a significant effect...
Effects of External Loadings on Large-Diameter Buried Pipelines
Development of oil and gas resources in the far north has involved extensive use of buried steel pipelines. Buried pipelines, particularly onshore, are frequently subjected to heavy superimposed...
Geotechnical Characteristics of Seafloor Sediments: Norton Sound, Alaska
During the past few years the USGS has been conducting studies in the northern Bering Sea aimed at identifying geologic and environmental conditions that may be hazardous to offshore resource...
Seismic CPT to Measure In-Situ Shear Wave Velocity
A new test, called the seismic cone penetration test (SCPT) is described. A small rugged velocity seismometer has been incorporated into an electronic cone penetrometer. The combination...
Shear Moduli Measurements under True Triaxial Stresses
The effect of state of stress on the shear wave velocity and shear modulus of a dry sand was examined. Testing was performed in a large-scale triaxial device in which cubic soil samples...
Lab Measurements of Gmax Using Bender Elements
This paper describes in detail the installation and use of piezoceramic bender elements in a variety of standard geotechnical laboratory testing equipment at NGI (e. g. , triaxial, direct...
Return to search