A Comparison of Modeling Techniques for the Buckling of Stiffened Shells
Different techniques are used to compute the collapse loads of a family of stiffened shells. Large differences are observed between the various predictions. Detailed numerical studies...
Buckling of Frames with Load-Dependent Supports
The supports of frames may increase their rotational resistance as they are compressed. It is assumed here that this stiffening is a linear function of the load. Sway and nonsway buckling...
Postbuckling Analysis of Composite Stiffeners under Uniaxial Compression
This paper presents an analytical and experimental study conducted for postbuckling of I-section stiffeners. A stability analysis was carried out to determine postbuckling response of...
Elastic Stability of a Laminated Column
Buckling load of an unsymmetric, laminated column is obtained through the use of imperfection method. The condition requiring to have non-vanishing bending moment at the ends of a pinned-pinned...
Reliability of Steel Columns Subjected to Buckling?Comparison of International Standard Codes of Design
Standard codes of design represent the phenomenon of buckling by means of a curve taking into account random structural imperfections. The author suggests a probabilistic method to evaluate...
Application of Probabilistic Reliability Analysis Methods to Ariane 5 Unequipped Booster Case
The paper demonstrates the capabilities of probabilistic structure analysis methods as a tool to support the design and manufacture of the Ariane 5 Unequipped Booster Case within a RAMS...
Flexible Pipe Design Revisited
An overwhelming soil factor in the Iowa formula and random deformations at installation affords soil a prominent role in flexible pipe; this, together with a maximal deflection rule make...
Buckling Design of Vierendeel Reticular Shells
Double layer reticular shell structures carry very little transverse shear, thus, it may be appropriate to substitute the inter-layer diagonal members with 'space'...
Analysis of Tapered and Stepped Columns by Analogy to Cantilever Deflection
An analysis is developed for handling the buckling design of tapered and stepped columns with the aid of the so called 'amplification factors'. When these factors...
Buckling Load of Tapered Columns
The basic tapered column with larger section in the center, is considered using Rayleigh-Timoshenko method. Column has linearly increasing Io with...
Buckling of Variable Cross-Section Columns
An approximate solution for the problem of buckling of variable cross-section columns, loaded by variable axial force is given, for several boundary conditions. Both the cross-section...
Buckling of Unsymmetrical Thin-Walled Members
The formulation of a three-dimensional model based on p-version finite element method for the elastic buckling analysis of unsymmetrical thin-walled members under axial compression and...
Cold-Formed Z-Sections Under Axial Load and Bending
The use of cold-formed Z-section members as beam-columns presents some unique design problems which are not adequately addressed in the current design specifications. If these members...
Stability Analysis in Bracing and Support Design
A post-buckling stability analysis is carried out for struts with multiple elastic lateral supports. Both hinged-end and fixed-end conditions are considered. A criterion of sufficient...
Lateral Buckling of Beams: General Considerations
The paper presents a solution for the elastic, lateral-torsional buckling of beams under unequal end moments using Worthington's method of superposition of modes involving...
Optimal Shape Design of Columns for Buckling
A procedure for the shape optimization of a column for prescribed buckling load is developed. The procedure uses a new analysis technique that enables the formulation of the optimization...
Buckling of Tapered Columns by P-Version of F.E.M.
The local, distortional, overall, and interactive buckling of tapered, thin-walled members under axial compression and flexure are considered by using three-dimensional models based on...
Long-Term Buckling of Composite Columns
A consistent theoretical study of the creep buckling behaviour of viscoelastic laminated columns is presented. The problem is treated by means of the quasi-elastic method. The analysis...
Discrete Field Stability Analysis of Latticed Towers
The design of latticed towers is often controlled by the stability of the overall system as opposed to local member buckling. The purpose of this paper is to develop an elastic stability...
Buckling Criteria for Earthquake-Induced Overturning Stresses in Cylindrical Liquid Storage Tanks
Perhaps one of the most common forms of seismic damage to cylindrical liquid storage tanks made out of steel is buckling of the tank wall due to vertical overturning stresses. Buckling...
Return to search