Alternate Designs for the Sidewalls of Hydraulic Jump Stilling Basins
This paper discusses several alternate designs to replace the full height sidewalls of a type 2 U.S. Bureau of Reclamation stilling basin. The alternate designs that were investigated...
Modeling Side-Weir Diversions for Flood Control
Side-channel weirs can be used for diversion to reduce flood peaks. This study has developed a means for incorporating the effects of side weirs in HEC-1 and HEC-2 calculations through...
Dam Safety, Yes.; But What About Safety at Dams?
Design and construction of safe structures are the professional obligations of hydraulic engineers. However, there are environmental dangers with safe structures which engineers often...
Hydrologic Safety of Earth Dams
Hydrologic and hydraulic analyses are presented pertaining to the safety evaluation of an earth dam located downstream of another smaller earth dam. The upper dam is assumed to breach...
Design of Riprapped Scour Holes for Flip Bucket and Overfall Spillways
Presented in this paper is a simple method of predicting pre-excavated scour depths and geometry for riprapped basins below flip bucket spillways. The input data needed for establishing...
A Numerical Solution Technique for Incompressible Flow
Presented is a numerical solution technique which employs the explicit predictor-corrector scheme of R.W. MacCormack in solving the governing two-dimensional equations of motion on a staggered...
An Error Analysis of the Dynamic Wave Model
The Dynamic Wave Operational Model (DWOPER) is used to forecast river stages on the Lower Columbia River. DWOPER was developed by the National Weather Service's Hydrologic...
Partial Area, Variable Source, Rainfall Runoff Model Utilizing Digital Mapping
A partial area, variable source hydrologic rainfall/runoff model, called MAPHYD, was developed utilizing digital maps, interactive computer graphics, and several infiltration mechanisms....
Computer Aided Hydraulic Design of Open Channels
The results of tests by the U.S. Army Corps of Engineers District, Los Angeles (LAD), became a major part of the Corps' EM 1110-2-1601, Hydraulic Design of Flood Control Channels....
A Shopper's Guide to Urban Stormwater Software, Revisited
Results of a survey of urban stormwater software were first discussed by the author in August, 1985. A trend toward widespread adoption of SCS procedures as a new standard in urban hydrology...
Concrete Habitable Structure on the Moon
This paper presents construction methods for a concrete habitable structure on the Moon. The study was conducted on the assumption that a concrete manufacturing plant has already been...
Construction Operations for an Early Lunar Base
Construction and excavation operations performed during the earliest stages of a manned lunar base pose a unique set of problems. This paper will describe six construction tasks that are...
Earthmoving in the Lunar Environment
This paper analyzes the lunar 'earthmoving' process with inputs, outputs, and external conditions acting upon it. Lunar environmental conditions such as temperature,...
Lunar Agricultural Requirements Definition
Requirements are presented for an agricultural system that would supply a lunar base. This agricultural system consists of plant growth units established within pressurized modules. Each...
Design of a Second Generation Lunar Base
We discuss the design of a permanent lunar base of 100 person size which may be able to expand to a base of about 500 person size. We present a preliminary design for a base concept which...
Candor Chasma Camp
This paper proposes a camp at Mars, in the Coprates region of the Valles Marineris rift, just below the equator on Candor Mensa 6�-12'S, 73�-30'W. Beginning at...
Homesteading Mars
The author gives serious study to setting up a permanent Martian base during the first or second manned Mars mission. The savings of fuel and equipment for the return trips might pay for...
Animation/Simulation for Construction Planning
The importance of a highly efficient schedule for space construction cannot be overestimated. A detailed scheduling process working closely with design data could reduce costs, minimize...
Robotic Influence in the Conceptual Design of Mechanical Systems in Space and Vice Versa: A Survey
A survey is presented of the methods of constructing structural elements in space by the application of robotic devices. Two fundamentally different approaches to the solution of robotic...
Simulator for Telerobotic Assembly, Maintenance and Repair of Large Space Structures
A first approximation level computer simulator for telerobotic assembly of large space structures is described. Approach, methodology and initial results are presented. An example based...
Return to search