Turnkey Hydropower at St. Cloud
The St. Cloud Hydroelectric Project is located at an existing dam on the Mississippi River in St. Cloud, Minnesota. The project consists of a two-gated spillway and an 8.6-megawatt powerhouse...

Devil Canyon Powerplant Enlargement
This paper presents the design and construction aspects of the enlargement of the existing Devil Canyon Powerplant from 120 MW to 280 MW. Subjects covered include site geology, powerhouse...

Harnessing the Allegheny: Four Low-Head Projects
The navigable portion of the river, extending northeast of Pittsburgh approximately sixty miles, contains eight lock and dam systems under the jurisdiction of the U.S. Army Corps of Engineers...

Siphon Penstock Installations at Hydroelectric Projects: A Survey of Design, Construction and Operating Experience
There can be advantages to using siphon penstocks at small hydro projects, particularly those constructed at existing dams. One problem, however, is a lack of documentation of siphon penstock...

Paradise River, a Challenging Small Hydro Development
The frequent assumption that small hydro developments are simple is not always borne out in practice. A case in point is the Paradise River Development in Newfoundland, Canada. This paper...

Harnessing the Snake: A Construction Viewpoint
The Gem State Hydroelectric Project, five miles south of Idaho Falls, Idaho on the Snake River, consists of a 900-foot-long, 40-foot-high dam; approximately four miles of earthend dikes;...

Implementation of a General Purpose Site Monitoring Network
STS Hydropower owns and operates several hydroelectric plants distributed throughout the United States. These plants, equipped with intelligent controllers, have been remotely monitored...

Recent Developments in Computer Based Control Systems for Hydro Power Control
In recent years microcomputer technology has come to dominate electric control systems. Modern control equipment provides many convenient means for ensuring easy, precise and safe operation...

Foundation Engineering
Current Principles and Practices
The proceedings of the 1989 ASCE Foundation Engineering Congress (entitled Foundation Engineering: Current Principles and Practices) address advances in the state-of-practice and in research...

Environmental Engineering
The 1989 Specialty Conference on Environmental Engineering was held in Austin, Texas on July 10-12, 1989 with cooperation from the University of Texas at Austin Civil Engineering Department...

Coastlines of Italy
These papers were presented at Coastal Zone '89 the Sixth Symposium on Coastal and Ocean Management held in Charleston, South Carolina, July 11-14, 1989. This volume is a...

Coastlines of Brazil
These papers were presented at Coastal Zone '89 the Sixth Symposium on Coastal and Ocean management held in Charleston, South Carolina, July 11-14, 1989. This volume is a...

Coastlines of the World
Coastlines of the World is an ongoing series that explores the different coasts from around the world. It provides the civil engineer with a broad understanding of coastal and ocean management...

Barrier Islands
Process and Management
These papers were presented at Coastal Zone '89 the Sixth Symposium on Coastal and Ocean Management held in Charleston, South Carolina, July 11-14, 1989. This volume is part...

Coastal Zone '89
Coastal Zone '89 is the sixth in a series of multidisciplinary meetings on comprehensive coastal and ocean management. The papers included in this publication review technical...

Sludge in the Nineties
Strict new regulations proposed for sludge disposal have toughened the challenge ahead for engineers. The regulations are the first to ever address sludge disposal in a comprehensive,...

CAD Speeds Viaduct Replacement
Lack of an available detour around construction of a major viaduct spurred city officials in Reno, Nev. to build a bridge nearby to serve the purpose. Although funded separately, the permanent...

Beautiful Bridges
There are no rules for creating beautiful bridges. While talent and experience count, bridge design is quite complex and collaboration between highway engineers, architects, and landscape...

University Programs in Computer-Aided Engineering, Design, and Manufacturing
The University Programs in Computer-Aided Engineering, Design, and Manufacturing (UPCAEDM) annual conferences provide for the presentation and exchange of ideas related to current developments...

Glitches in Flitch Beam Design
Wiesenfeld proposes a set of design criteria for flitch beams. These beams, in which wood and steel sections are bolted together to act as a single structural unit, are currently covered...

 

 

 

 

Return to search