Random Vibrations of Geometrically Nonlinear Finite Element Structures
A finite element formulation combined with stochastic linearization method is developed to study the large amplitude vibration characteristics of structures subjected to random loadings....
Actual Versus Assumed Behaviour of Girder Bridges
It is generally believed that the discrepancies between calculated and actual responses of bridges can diminish, to the point of being nonexistent, with refinement in the method of analysis....
Bridge Repairs?Unexpected Effects on Reliability
There is a significant probability that a bridge will require repairs at some time during its service life. Repairs correcting one deficiency can cause other, unanticipated problems. Awareness...
Reliability of Cracked, Prestressed Girders
For prestressed concrete structures in non-aggressive environments or where corrosion-protected prestressing strands are used, it may be possible to allow flexural cracking into the precompressed...
Rehabilitation of Highway Bridges: Design and Operational Considerations
The design of a rehabilitation of a bridge which must maintain some lanes of traffic requires special consideration of construction procedures and traffic control, which are discussed...
EXPSYS: Offshore Structures' Expert System
This paper builds a framework of an expert system in the area of offshore structures. Expert systems, in general, are classification systems. They embody a core of knowledge about a specific...
System Reliability Using Expert Opinion
The objective of the study on which this paper is based was to determine the safe performance of several different interior gas piping systems. This paper describes the piping systems...
An Expert System for Reliability Engineering
The goal in this project is to create an expert system to do failure mode investigations from 'first principles,' or the basic understanding of the way components...
The Role of Decision Rules on Structural Safety Evaluation Systems
Three steps are involved during an assessment procedure. The first step is to make a diagnosis for possible causes of the damage, the second is to perform a qualitative evaluation including...
Importance Sampling in Structural System Reliability
In structural system reliability analysis, it is frequently necessary to resort to Monte Carlo simulation (MCS). This paper focuses on Importance Sampling, an advanced MCS method, which...
Experiences with Applications of Importance Sampling in Structural Reliability Computations
This paper presents some experiences and observations relating to the use of importance sampling in structural systems reliability computations. These are presented with three examples,...
Reliability Based Optimal Structural and Mechanical Design
A reliability based optimal design strategy has been developed. Nonlinear limit state functions and nonnormal random variables can be accommodated. For structural systems analysis, a failure...
A Kinematic Approach to Simulation-Based System Reliability Evaluation
System reliability of complex structural engineering systems is often estimated by simulation-based procedures, with failure analysis based on a static (limit state) formulation or a kinematic...
System Reliability Under Time Varying Load
The reliability of ductile and brittle structural systems under time varying loads is investigated. The formulation in the context of outcrossing of a vector process is examined. A new...
Reliability Methods for Steel Members Subjected to Axial Load and Moment
There has been a significant amount of research performed on determining the reliability of elastic-plastic frames where failure is through the formation of a plastic collapse mechanism....
Reduction of Imposed Loads for Beam and Column Design
Imposed loads on beams and columns are generally reduced to effect in economy in design. A study to evaluate the reduction criteria by evaluating the Equivalent Uniformly Distributed Loads...
Effects of Nonlinearities on Structural Reliability and Serviceability
Serviceability and failure limit states are computed using the Simple Plastic Theory (SPT) as well as with a Nonlinear Structural Analysis Program (NSAP). Geometric and material nonlinearities...
Reliability Analysis of Single-Headed Anchor Bolts
Several design equations for predicting the capacity of single-headed anchor bolts embedded in plain concrete have been recommended in the United States. The capacities predicted by these...
On Modelling the Nonlinear Relationship Between Random Fields by Means of Higher-Order Spectra
This paper addresses the input-output relationship of nonlinear systems that may be expressed in terms of a hierarchy of linear, quadratic and higher-order transfer functions or corresponding...
Dynamic Response of Tall Buildings to Wind Loads
The purpose of this study is to perform a probabilistic analysis of tall buildings subjected to wind excitation. A time domain simulation is first applied to the nonlinear problem. After...
Return to search