Aerodynamic Modeling of Chimneys
The wake induced acrosswind behavior of circular cross-section structures, such as industrial chimney, has been studied for many years using wind tunnel models. Due to the relaxation of...
Mitigation of Wind-Induced Vibration of Tall Buildings
This paper summarizes a detailed study of the sensitivity of building acceleration to changes in structural stiffness, mass and damping and to the eccentricities in the centers of stiffness...
Aerodynamic Methods for Mitigating Wind-Induced Building Motions
Excessive wind-induced motions of tall buildings most frequently result from vortex shedding induced across-wind oscillations. This form of excitation is most pronounced for relatively...
Dynamic Response of a Building with Dual System
The paper presents the dynamic response of a 30-story building with dual system consisting of cross-bracing and beam-column moment resisting frames. Two types of beam-column connections,...
Tuned Liquid Damper and Its Application to Tower-Like Structures
A new kind of damper, Tuned Liquid Damper (TLD) relying upon motion of, shallow liquid in a rigid container for absorbing and dissipating the vibrations energy is explained. The performance...
Local Wind Pressures on Roofs
The paper reviews the results of the most recent research studies in the evaluation of wind pressure coefficients for the design of roof cladding elements. The effect of roof geometry...
Wind Effects on Loose-Laid Cladding Systems
Modern roofing systems for flat roofs frequently make use of rigid insulation boards, gravel and concrete pavers that are loose-laid on top of the waterproof membrane. The authors have...
Ballasted Single Ply Design Guide Development
A new roofing concept called ballasted single ply has now captured about 25% of the new and retrofit flat roof market. This concept relies on the use of ballast to provide the wind resistance...
Seismic Response of Multistory Building Structures With Flexible Floor Diaphragms
An efficient model for three-dimensional analysis of multistory structures with flexible floor diaphragms is proposed in this paper. Three-dimensional analysis of a building structure...
Floor Response Spectra Including Structure-Equipment Interaction Effects
An efficient method for generating floor response spectra with the structure-equipment interaction effects is proposed. Floor response spectra are computed from a prescribed ground response...
Optimum RC Member Design With Discrete Sections
This paper concentrates on the development of simplified yet effective algorithm for optimum reinforced concrete (RC) member design. After constructing the data base of predetermined reinforced...
Flexural Strength of Ultra-High Strength Concrete Members
Various proposals have been made for the pridiction of strength of high strength concrete sections. One of the most important parts of any strength computation procedure is the assumption...
Codification of Wind Effects for a Long Span Suspension Bridge
Construction of the Akashi Kaikyo Bridge, which will cross the Akashi Kaikyo Straits with a shore-to-shore of approximately 4 km, started in spring of 1988. Firstly discussions on the...
Status of Structural Engineering Research
Problems and opportunities for structural engineering research are being addressed in a study by the ASCE Structural Division Task Committee on Structural Engineering Research Needs/Funding....
Toward an LRFD-Based AASHTO Bridge Specification
During the 1987 AASHTO Bridge Committee Meeting, recommendations from NCHRP Project 20-7/31 regarding the development of a probability-based LRFD bridge specification were accepted. NCHRP...
Bridge Loading Evaluation for Limit States Design in Japan
Some statistics regarding bridges in Japan are firstly explained. Next, the limit states design which will be introduced in 1995 for highway bridge design specification in Japan is briefly...
Fatigue Life Evaluation of Welded Structural Details in Steel Highway Bridge
Stresses in highway bridge members, fatigue crack propagation behavior and long life fatigue strength properties of welded members under traffic loadings and prediction of fatigue life...
Evaluation of Bridge Safety and Remaining Life
In developed countries, the emphasis on the infrastructure is changing from new construction to the safe maintenance of existing structures. Highway bridges represent an excellent example...
Load and Resistance Factor Design for Engineered Wood Construction
The wood industry has provided sponsorship for the development of a reliability-based, load and resistance factor design specification for engineered wood structures. This user-tested,...
Load Combinations for LRFD With Wood Construction
Probability based limit states design for wood construction is complicated by the fact that wood is a natural material with large variations in mechanical properties and is sensitive to...
Return to search