Application of Displacement of Discontinuity Methods in Underground Mine Design
Displacement discontinuity methods for stress analysis, pioneered by Starfield and Crouch (see, for example, Starfield and Crouch, 1972; Crouch, 1976; and Crouch and Starfield, 1983),...
Prediction of Highway Construction Noise Levels
A model for the prediction of noise levels from highway construction operations has been developed under sponsorship of the Federal Highway Administration (FHWA). Noise sources are geometrically...
Highway Noise: FHWA Requirements and Barrier Design
Since 1973, the Federal Highway Administration (FHWA) has required noise studies for nearly all proposed roadways and roadway improvements that receive federal aid. An overview of these...
Cost-Effective Design of Practically Vibration-Free High-Technology Facilities
Advanced electro-optical equipment, such as that used in the production of integrated circuits, requires clean environments with extremely limited vibrations. Ground motions, personnel...
Site Selection and Building Design for Minimizing Vibration
Over the last five to ten years, line resolutions required for state-of-the-art semi-conductor wafers have dropped to well below 1 micron. As a result, controlling environmental building...
On the Design of Continuous Composite Beams
Methods of analysis and design of continuous composite beams are presented. Numerical analysis is used to determine the effective width of the slabs to be used in design. The influence...
Behavior and Strength of Stub-Girder Floor Systems
The paper presents a detailed evaluation of the behavior and strength characteristics of the stub-girder floor system. This is a composite girder and beam structure that integrates the...
Proposed Design Criteria for Composite Steel Deck Slabs
Composite steel deck slabs have continued to gain popularity; today they are one of the predominant means of floor slab construction in most typical buildings. The term 'composite...
Design and Testing of a 400 Ft Span Plate Girder Bridge
The paper describes design features and testing of the Madawaska River Bridge. The bridge is unique in being the longest span plate girder bridge in Ontario, having continuous spans of...
Composite Bridge Design in Germany
A span length between 40 m and 12 m has been regarded as optimal up to the mid-60's for a composite design to compete with prestressed concrete or steel alternatives. With...
Recent Developments in Mixed Steel-Concrete Systems
Mixed steel-concrete systems have emerged into a well established new system that can be used as readily as either steel or concrete systems for high-rise buildings. Mixed systems offer...
Seismic Capacity Evaluation of SRC Buildings
The Japanese standard for seismic capacity evaluation of existing composite steel and reinforced concrete (SRC) buildings was introduced. As it developed, based on the previously established...
Composite and Mixed Construction in Czechoslovakia
Various composite and mixed systems have been used in Czechoslovakia. Special attention is focused on design methods, effective construction, and material savings. Current developments...
Seismic Strengthening of Existing RC Buildings
Seismic strengthening of existing reinforced concrete (RC) frame buildings by the use of steel braces or panels was studied experimentally. A special joint between steel elements and the...
Checking Off CADD Priorities
Diving head on into new computer aided design and drafting (CADD) hardware and software without considering their effects on firm or university's operation is as bad as ignoring...
Analysis of Drinking Water Systems: A Spatial Approach
This paper describes recent examples of spatial analyses as (1) a unifying concept for allocation of costs to various elements of water treatment and delivery; (2) a link and node (Network)...
Incorporating Graphics in Water Distribution Analysis
One area that has currently been receiving attention is the presentation of hydraulic analysis results utilizing computer graphics to display pipe network and pressure values in graphical...
Water Quality Modeling of Distribution Systems
Computer modeling of hydraulic conditions in distribution systems has been widely applied over the past decade for design and operation of systems. Conversely, little attention has been...
Adapting a Pipe Network Analysis Computer Program
The Metropolitan Water District of Southern California (Metropolitan) has developed a mathematical simulation model for a key portion of its distribution system. A representative portion...
Implementation of a Micro-CADD System
Computer-aided-design-and-drafting (CADD) systems utilize computer technology to aid the engineer in his work. CADD systems are designed to process graphics with speed and accuracy to...
Return to search