Laupahoehoe Harbor Planning, Design, & Construction
Laupahoehoe Harbor provides access to the fertile fishing grounds along the northeast or Hamakua coast of the island of Hawaii, Hawaii. The planning, design, and construction of Laupahoehoe...
Application of a Dolos Structural Design Procedure
Dolos concrete armor units are widely used to protect coastal structures. New developments in armor unit strength design permit the armor unit designer to optimize the dolos parameters...
Real-Time Condition Monitoring of Concrete Structures by Embedded Optical Fibers
Fiber optic sensor methodology has matured to the point where the impact of this new technology is now evident, especially in aeronautics and space structure applications. External perturbations...
Concrete Beam Testing with Optical Fiber Sensors
The use of an embedded multimode optical fiber to monitor curing and load-to-failure testing of a reinforced concrete beam has been investigated. The embedding process used to network...
Nondestructive Crack Identification by Acoustic Emission Analysis and Ultrasonic Frequency Response
Nondestructive evaluation (NDE) by the acoustic emission (AE) analysis and the ultrasonic testing (UT) on the spectral (frequency) response is studied to identify crack geometry. AE waveform...
Pullout Testing of High-Strength Concrete Members
An experimental investigation of a high-strength concrete mixture was undertaken to measure and evaluate pullout and compressive strength properties. Two columns, a slab, and cylindrical...
Micromechanical Characterization of Damage-Plasticity in Metal Matrix Composites
A micromechanical theory of damage mechanics and plasticity is proposed for fiber-reinforced metal matrix composites. The composite system is assumed to consist of elastic, continuous...
Fracture Toughness Model of Fiber Reinforced Ceramics
This paper addresses the fracture resistance mechanism in fiber reinforced ceramics, and focuses attention on the specific effects associated with the nonlinear nature of the fiber pullout...
Determination of In-Situ Stresses From Acoustic Emissions
Acoustic emissions (AE) are microseismic activities that are generated in concrete by cracking and damage. The rate of Acoustic Emissions, called the 'Event Rate', can provide indication...
Evaluating Polymer Concrete Bridge Expansion Joints Using Acoustic Emission
This study is to simulate the acoustic emission (A/E) of polymer concrete bridge expansion joints subjected to controlled representative loads by a rotating test apparatus on a circular...
Detection of Cracks in Reinforced Concrete Cans
The Acoustic Emission Technique (AET) is known as a good possibility for non destructive detection of cracks in metal down to very small dimensions. To use AET for concrete, an efficient...
A Shear Locking Free Three-Node Triangular Plate Bending Element for Moderately-Thick and Thin Symmetrically Cross-Ply Laminated Plates
A shear locking free three-node triangular plate bending element based on Reissner/Mindlin theory for symmetric general cross-ply laminated plates is developed. The element has total nine...
Micromechanics Based Design for Pseudo Strain-Hardening in Cementitious Composites
Micromechanical model constructed on the basis of fracture mechanics and fiber bridging provides a means of selection of fiber, matrix and interface property combinations for which short...
Effect of Micro-parameters on the Macroscopic Behaviour of Ductile Fiber Reinforced Brittle Matrix Composites
In this paper, the modelling of crack bridging stress vs crack opening (?-?) relation of ductile fiber brittle matrix composite in terms of its microscopic parameters is described. Parametric...
Shear Resistance Models for Concrete Bridges
Statistical models are developed for the shear resistance of concrete bridge girders. Two structural types are considered: reinforced concrete T-beams and prestressed concrete AASHTO girders....
Fiber Suppressed Localization in Tension
Tensile fracture in portland cement based fiber composites is studied. Formation and propagation of stable microcracks is examined by means of holographic interferometry. Distributed microcracking...
Crushing Response of Energy Absorbing Composite Structure
A description of why and how composite structures crush and absorb energy is presented. The three primary crushing modes of composite structure (transverse shearing, lamina bending and...
Scattering of Waves by Steel Reinforcement in Concrete
The application of wave-sensing methods to the non-destructive evaluation of concrete structures requires often the use of simple (or at least tractable) models for the solution of the...
Flexural and Shear Studies of Carbon Fiber Reinforced Beams
This paper presents the results of laboratory test on beams reinforced with three dimensional continuous carbon fiber grid. The grid is prefabricated by three-dimensional weaving and epoxy...
Compressive Strength and Characterization of Failure Modes for Polymer Concrete
The effect of aggregate type, polymer content and specimen dimensions on the compressive strength and failure modes of a polyester polymer concrete (PC) was investigated. Two aggregate...
Return to search