Scale Effects at Intakes Due to Boundary Layer Growth
Boundary layer development in hydraulic models of intakes based on Froude criteria can be poorly scaled because it is viscosity dependent. The potential for scale effects can be estimated...
Physical Modeling of Heated Discharges into a Stagnant River
An alternative cooling system study was performed for the Damietta Combined Cycle Plant in Egypt. The alternatives included spray canals, helper cooling tower and once-through cooling....
Model Study of New Madrid Pumping Station
The proposed pumping station on the New Madrid Floodway consisted of a draft tube type sump design (referred to as a formed suction inlet) to eliminate swirl and provide a more uniform...
Hydraulic Analysis of the Schoharie Creek Bridge
Ten people died on April 5, 1987 as a result of the collapse of two spans of a New York State Thruway bridge into the floodwaters of Schoharie Creek. The cause of the bridge failure was...
Two-Dimensional Inter-Rill Flow Model for the Analysis of Agricultural Runoff
This paper presents a model describing the flow field for the inter-rill component of agricultural runoff. Given rainfall intensity, surface roughness, rill spacing, and longitudinal and...
Calibrating a 2-D Fate and Transport Model of Watts Bar Reservoir
A branched two-dimensional water quality model has been developed and tested for the Watts Bar Reservoir, including the Clinch River and Emory River embayments. The general stratified...
1-D and 2-D Analysis of Flood Plain Encroachment
The paper reports on a study into the effects of a local encroachment in a broad regular flood plain. The results of a one-dimensional analysis were compared with the results of an equivalent...
The Illinois GIS and Hydrologic Database
Development of the Illinois Geographic Information System (GIS) from 1983 to the present is described including the hardware configuration and ARC/INFO software. The database design at...
Overfall Stress and Pressure Distributions
The magnitude and distribution of hydraulic shear stress and pressure on the boundary of a straight drop overfall are presented for multiple overfall heights and flow rates. Hydraulic...
Jet Injection Model Studies for the City of Los Angeles
The Hypersion Treatment Plant for the City of Los Angeles is currently undergoing an expansion project. A major component of this system is a sludge recycling system. And it is essential...
Energy Dissipation Structure for Fixed-Cone Valves
Results of a model study to investigate the hydraulic performance of a proposed energy dissipation structure for fixed-cone valves are presented. Procedures for estimating pressures and...
Vessel Induced Physical Effects in a Navigation Channel
The U.S. Army Corps of Engineers is investigating ways to improve lockage efficiency at the Marmet Locks on the Kanawha River, West Virginia. A physical effects prediction model have been...
Prediction of Siltation at a Point
This paper describes a zero-dimensional mathematical model which predicts siltation at a point on a cohesive sediment bed. The processes of erosion, deposition and consolidation are modelled...
A Numerical Analysis Approach to the Solution of Unsteady Flow in Open Channels
Several inherent characteristics of all current numerical simulations of the unsteady flow equations prevent total confidence in their use. Inconsistencies within the numerical procedures...
Grid Requirements for Numerical Models Containing Training Works
The numerical modeling of the rapid changes in flow variable in open channel flow systems containing training works, such as dikes, requires special attention in grid development. This...
A
A two-component turbulence model is introduced for depth-average flow calculations in shallow open-channel flows. This model treats the bed-generated turbulence as a background component,...
High-Resolution Two Dimensional Advective Transport
The paper describes a two-dimensional high-resolution scheme for advective transport that is based on a Eulerian-Lagrangian method with a flux limiter. The scheme is applied to the problem...
Numerical Prediction of the Turbulent Flow with a Free Surface for 3-Dimensional Situation
An efficient finite-difference method, the HH-SIMPLE, has been developed that is based on a new concept of hydraulic pressure with two additional equations concerning the water surface...
Far-Field Numerical Model Studies for Boston's New Secondary Treatment Plant Outfall Siting
By the late 1900s, Boston is scheduled to have built a new secondary treatment plant that combines the waste streams from two existing plant, and discharges the resulting liquid effluent...
Infiltration Trenches for Urban Runoff Control
A two-dimensional finite element model has been developed to simulate the transient flow in a variably saturated porous medium for the study of infiltration trenches. Parameters such as...
Return to search