Distributed Flexibility Models for Nonlinear Analysis of RC Structures
The application of distributed flexibility member models in inelastic analysis of reinforced concrete (RC) structural systems is examined. While the utilization of flexibility-based formulations...
RC Beam-Column Element for Nonlinear Frame Analysis
Recent studies have shown that beam-column finite elements that enforce equilibrium rather than compatibility along the element are better suited for the description of the strength and...
Nonlinear Earthquake Analysis of Concrete Gravity Dams Including Sliding
The sliding stability of a concrete gravity dam during a design earthquake must be investigated to assess the seismic safety of the dam. A new numerical procedure for solving the equations...
Finite Element Analysis of Shear in RC Girders
Two complementary approaches are presented to model the shear behaviour of reinforced concrete structures. A local one, based on a probabilistic modelling of cracking, accounts for local...
Fast Monte Carlo Simulations and Safety Index Checking
This paper presents recent techniques which require a small number of simulations to assess the structural reliability. They combine both the concept of importance zones in the random...
Wave Run-Up and Reflection on a Permeable Sea Wall
The swash oscillation on a sloping seawall made of step-shaped concrete blocks, waves and water particle velocity in front of the seawall were measured. It was inferred that incident waves...
The Evolution of Breakwater Design
The purpose of this paper is to present a view of the evolution of both the rubble mound and vertical faced breakwaters from the earliest design through the Iribarren and Hudson era. Determining...
Dynamic Loading of Airfield Pavements Caused by Aircraft Operations on Rough Runways
This paper presents results for dynamic pavement loading of various aircraft under takeoff and taxing scenarios. The data were obtained from computer simulation and applied to the Corps...
The Use of Crumb Rubber Modifier in Hot-Mix Asphalt
This paper summarizes the literature on the use of CRM as an additive in HMA. Wet and dry processes are discussed and the objective of each explained. Material, design and construction...
Utilization of Phosphogypsum-Based Slag Aggregate in Portland Cement and Asphaltic Concrete Mixtures
This study centers around the potential utilization of phosphogypsum-based slag aggregate as a substitute for coarse aggregate in both portland cement and asphaltic concrete surfaces for...
Recycling Portland Cement Concrete Pavement at the Contractor's Option
This paper summarizes three portland cement concrete airfield pavement recycling projects at the Outagamie County Airport in Appleton, Wisconsin. The specifications for the projects did...
Nighttime Cement Concrete Pavement Replacement Seattle-Tacoma International Airport
Several airfield improvement projects are currently underway at Seattle-Tacoma International Airport (Sea-Tac), many of which are being constructed using cement concrete pavement. Due...
Hydraulic Properties of Surface Runoff on Ash-Mixed Concrete Pavement
The disposal of incinerated sludge ash from wastewater treatment plants is becoming an increasingly difficult problem in highly populated cities. The feasibility of reusing sludge ash...
Concrete Watertight Structures and Hazardous Liquid Containment
The purpose of
Rehabbing Bridges Under Traffic
Four urban examples demonstrate how an owner's decision to keep it open during rehabilitation construction forces the designers to contend with an extra set of problems. Reanchoring...
Roller Compacted Concrete IV
This engineering manual
Modular Evolution
The construction industry typically thinks of modular steel bridges in terms of the World War II vintage Bailey Bridge. The Bailey Bridge was designed to be quickly deployed to replace...
Lightweight Concrete for a Segmental Bridge
Structural lightweight concrete can help increase the stiffness and decrease the mass of a bridge; both are qualities that make the structure more likely to survive an earthquake. Ordinarily,...
Estimating Clay Liner and Cover Permeability Using Computational Neural Networks
The ability to provide a quick estimate of the permeability value to be expected in laboratory testing (of field samples) would help to predict potential problems in meeting the permeability...
An Object-Oriented Approach for Reinforced Concrete Design
The use of the object-oriented programming approach in developing applications for the analysis and design of reinforced concrete members is discussed. Two object oriented programming...
Return to search