Design of Bridge Piers Against Ship Collision
Design rules for unprotected bridge piers, using uniform safety requirements, are proposed. The selection of an appropriate design vessel is based on a risk assessment model which uses...
Prediction and Control of the Wind Response of Long-Span Bridges with Plate Girder Decks
The aerodynamic stability of plate girder decks and methods of improving it are discussed. The selection of an appropriate design wind speed for flutter is reviewed including the effect...
Wind Tunnel Aeroelastic Model Study of the Baytown Bridge (Steel Alternative)
Analytical and full bridge aeroelastic model studies performed to assess the aerodynamic stability of the steel alternative Baytown Bridge over the Houston Ship Channel are described....
Aspects of Wind and Earthquake Dynamics of Cable-Stayed Bridges
In the course of dynamic analysis of long-span cable-stayed bridges for the effects of earthquake and wind, a number of observations have been made that may be of interest to designers....
Analysis and Design of Wind- and Earthquake-Resistance of an S-Curved Cable-Stayed Bridge
Just recently, in January of 1987, the first S-curved cable-stayed bridge in the world has been completed as a part of Metropolitan Expressway's Katsushika-Edogawa Route in...
Vancouver's Skytrain Cable-Stayed Bridge?Dynamic Behaviour
This paper focuses on the dynamic behaviour of the Skytrain cable-stayed bridge under the action of earthquakes and wind. The 340 m span railway bridge is located on the west coast of...
Dynamic Behavior of Three J.S. Cable Stayed Bridges
Dynamic considerations in the design of three recently designed cable stayed bridges are discussed. The presentation includes analysis for eigenfrequencies and eigenmodes, assessment of...
Effects of Three-Dimensionality and Nonlinearity on the Dynamic and Seismic Behavior of Cable-Stayed Bridges
The cases of multiple-support as well as uniform seismic excitations of these long and flexible structures are considered; furthermore, effects of the nondispersive travelling, seismic-wave...
Design Storm Selection for Stormwater Management Master Plans
The design rainfall event is an important performance standard for a stormwater management master plan. A stormwater master plan for Virginia Beach, Virginia, is used as a case study to...
Design of Seepage Fields for Stormwater Disposal
Stricker Pond is a shallow twenty-acre kettle hole pond in south-central Wisconsin. The pond receives runoff from a closed watershed that is rapidly undergoing low density residential...
Site Hydrology and Basin Design Using Spreadsheets
The Soil Cover Complex Method which was developed by the Soil Conservation Service is a commonly accepted method of evaluating site hydrology. The solution of this method is facilitated...
Micro-Illudas for Urban Drainage Design
The Illinois Urban Drainage Area Simulator (ILLUDAS) was developed at the Illinois State Water Survey in 1969 and has been available for use on mainframe computers since 1974. An enhanced...
Confidence Intervals for Flood Control Design
The line drawn and labeled as the flood frequency curve is seldom identified as to what confidence is associated to the plot. For example while flood control designs are typically based...
Design Criteria for Detention Basins in Urban Drainage
Many communities require the use of detention basins in order to manage the increased runoff discharge in all newly developing watersheds. The authors have shown earlier that the typical...
The Storage Matching Technique of Detention Basin Design
In recent years, use of continuous rainfall - runoff simulation with historic rainfall data has become much more popular for the design of detention basins and reservoirs. While it may...
Criteria for Spillway Design Floods
The procedures outlined in this paper only address the hydrologic safety criteria for spillway design floods. The recommended procedures are based on a careful identification of the social,...
Indemnification Costs in the Dam Safety Decision
The ASCE Task Committee on Spillway Design Floods has proposed safety criteria for three categories of dams. Category 1 dams are those with anticipated failure consequences so large and...
Safety Design Flood for Too Wide Creek Dam
This paper presents an example application of the procedure developed by the ASCE Task Committee on Spillway Design Floods for a dam on the Too Wide Creek. The example was developed from...
The Dallas Floodway Project
This paper explores the history of the Dallas Floodway project, past performance of the project under various flood conditions, recently updated hydrologic and hydraulic evaluations, and...
Monte Carlo Approach to Spillway Design Floods
This paper shows the use of a daily stochastic streamflow model for the calculation of the hydrograph for spillway design. Most of the literature related to the topic deals with the problem...
Return to search