Pipeline Types and Design Considerations
Pipelines are extensively used to upgrade irrigation delivery facilities. The advantages of a pipeline system include an improvement in water conservation and the ability to extend water...
Design of Semi-Closed Pipeline Systems
Semi-closed pipeline systems controlled by downstream activated float valves permit low pressure pipeline systems to communicate information from the outflow location back to the source...
Case Study?Closed Pipeline Systems
The paper discusses closed pipeline system and its automation, including variable pumping rates, sensing devices, automatic controls, pressure regulators, flow measuring devices, surge...
Case Studies?Semi-Closed Pipeline Systems, Orange Cove and Solano Irrigation Districts
The Harris Float Valve is a simple mechanically leveraged valve connected to a float, which activates the valve with the rise and fall of the water surface on the down stream side of the...
Case Study?Open Pipeline System, Coachella Valley Water District
A supervisory canal control system installation was started in 1966, seventeen years after start up, and a major upgrading was completed in 1983. The canal delivery system now has a central...
Pump Plant Control and Automation
Pumping plants for irrigation systems can be separated into two general types: source pumps which provide water to the system and booster pumps which increase the system pressure. Typically,...
Yakima-Tieton Irrigation District Rehabilitation Program
The Yakima-Tieton Irrigation District obtained funding from the U. S. Bureau of Reclamation and the State of Washington to replace an open canal and lateral irrigation delivery system...
Evaluation of and Recommendations for Drop Structures in the Denver Metropolitan Area
In 1982, the Denver Urban Drainage and Flood Control District published interim guidelines for the design of sloped, loose riprap drop structures, as well as vertical wall drop structures...
Design Considerations for Hydraulic Jump Structures
The primary purpose of this paper is to define the areal distribution of large-scale pressure pulses acting on the containment structure of a hydraulic jump. The results presented are...
Stepped Spillway Design with a RCC Dam
The hydraulic model study results for the Upper Stillwater stepped spillway design are presented. The studies encompassed several spillway geometries and design unit discharges ranging...
Open Channel Flow Resistance in Horseshoe Conduits
An experimental study of open channel flow resistance in horseshoe-shaped conduits is reported. The friction factor is shown to increase approximately 20 percent in comparison to values...
Hydraulic Design Limitations for Gravity Flexible (Non-Rigid) Plastic Pipes Flowing with a Free Water Surface
Hydraulic design limitations are necessary for gravity plastic pipes when designed for use as a sanitary sewer, flowing part full with a free water surface. The limitation for pipes designed...
Rehabilitation Measures?Wanaque Reservoir System
The rehabilitation of Pompton Lake Dam and the dams of the Wanaque Reservoir System has provided the North Jersey District Water Supply Commission with a safe, dependable source of water...
Preliminary Engineering Design of an Artificial Tidal Lagoon System in Kuwait
A coastal resort project was planned for a 30 hectare site along the Arabian Gulf approximately 69 km south of Kuwait City at Dubaiyeh. The master plan, originally developed by Kuwait...
Polyhedric Surfaces
A new design for spillways is proposed. The basic idea is to substitute the traditional shape of the continuous vertical bends by polygonal plane surfaces. In this way it is possible to...
Hydraulic Design of Pamo Dam Spillway
The design of the emergency spillway for the San Diego County Water Authority's (SDCWA) proposed Pamo Dam is discussed. Pamo Dam is a 264-foot (80. 5 meter) high roller compacted...
Numerical Modeling of Column Separation with Large Pressure Pulses
Liquid transients involving column separation occur in pipelines when the pressure drops to the vapor pressure of the liquid. The collapse of vapor cavities may result in short duration...
Joint Consideration of Pipe Breakage and Pipe Flow Probabilities
Two issues of distribution network reliability, namely, probability of pipe failure and probability of the design flow being exceeded have been discussed. Expressions containing measures...
Water Distribution System Design by Chance-Constrained Model
The objective of this paper is to present an optimization model for the design of water distribution systems considering the uncertainty in required demands, required pressures, and pipe...
Design of Overtopping Protection for Small Dams
Many existing small embankment dams in the United States cannot safely pass current design floods without overtopping. In the past several years, embankment overtopping protection has...
Return to search