Reliability of Bank Protection Works Subject to Erosion
Sediment movement and changes of bed levels in natural rivers are non-stationary processes. The design of protection works for structures against erosion should account for the time dependency...
Transport of Grain-Water Mixture by Waves
The numerical modelling of the morphological changes of coastal regions is hampered by the multiplicity of empirical sediment transport formulae. The paper discusses the modes of transport...
A Continuum Mechanics Approach to Loose-Bed Motion
A mathematical model is presented for simulation of loose-bed motion. The physical system is separated into two regions, a bottom region and an upper region. The bottom region is representative...
Sediment Transport Model for Muddy Tidal Rivers
This paper describes the development and application of a one-dimensional mathematical model capable of simulating the changes to the cross-sections of a muddy tidal river over a time...
Mid-Scale Laboratory Tests on a Two-Dimensional Movable-Bed Sand Model
A two-dimensional physical model was used to simulate wave-induced scour in front of a concrete dike sloped at 1:4. The tests were conducted at the U.S. Army Engineers Waterways Experiment...
Lessons from Ten Years Experience in 2D Sediment Modeling
The purpose of this paper is to share some of the lessons learned from the experience of the Hydraulics Lab Estuaries Division (WESHE) in applying two-dimensional (2D) numerical models...
Method to Predict Cropland Ephemeral Gully Erosion
The U.S. Soil Conservation Service (SCS) in cooperation with the Agricultural Research Service (ARS) has developed a microcomputer program to provide estimates of the average annual material...
An Overview of Computer Stream Sedimentation Models
This paper discuss some of the author's experience in computer modeling of stream sedimentation problems. Comparisons of twelve selected models developed and implemented in...
Modeling Erosion and Deposition Due to Suction and Jet Flows
PHOENICS, a commercial 3-D computational fluid dynamics software package, was modified for simulating seabed erosion and deposition. Time varying sediment fluidization, transport and deposition...
Sediment?Hyperconcentration Flow and Its Similarity Laws
The sediment- hyperconcentration flow are studied theoretically and experimentally, and the formulas for the Bingham shear stress, rigidity coefficient, fall velocity and transport capacity...
Sediment Transport Due to Turbidity Currents
The processes of sediment transport in a horizontal channel due to low-Reynolds-number turbidity currents are evaluated. A multiple-layer numerical model was developed to predict the flow...
Prediction of Time Development of Local Scour
The prediction of the time development of local scour is commonly solved by means of model tests. A brief description of the time-scale and the relation between the time and the scour...
Estimating Velocity and Scour in River Bends
A one-dimensional, steady-state, stream tube model was used to simulate hydraulic characteristics at a cross section. This enabled computation of higher velocities on the outside and lower...
Suspended Sediment Regression Model on Mud Coasts
Two statistical models of the concentration of suspended sediment on mud coasts have been developed by using the stepwise regression method. The statistical analysis in this paper is based...
Suspended Sediment Model of Offshore Tin Mining
The three dimensional dispersion equation is integrated vertically to use in describing the suspension of silt from offshore tin mining. The resulting two dimensional equation includes...
Hyperconcentrations, Mud and Debris Flows?A Summary
Brief descriptions of the properties of mud and debris flow and hyperconcentrated stream flow materials and their importance to the descriptions and modeling of these flows are presented....
Limitations of Modeling High Concentration Streams
Following the 1980 eruption of Mount St. Helens, high sediment concentrations caused rapid deposition and increased flood hazards along the Cowlitz River. The Corps of Engineers developed...
Comparison of Models for Single-thread Streams
A variety of two- and three-dimensional models for flow in curved channels and rivers have recently been made available for engineering use, and the question arises as to how sophisticated...
Selective Erosion: A Key Problem in Numerical Modelling of River-bed Changes
In capacity-controlled sediment transport of alluvial rivers the so-called 'hiding factor' determines the stability of the various grain-size fractions. The paper...
The Computation of Total Sediment Transport in View of Changed Input Parameters
The sediment transport phenomenon is one of the most difficult fields in water research. Due to the numerous parameters and various interactions among them several theoretical-empirical...
Return to search